Table of Contents
Advertisement
Hard Disk Installation
You can put a 3.5" SATA interface hard disk into the Network Media Center to
storage your media files, record the TV shows, or download the files from BT.
Before you install the hard disk to Network Media Center,
please make sure you have un-plug the power cable from
the device.
The system will format the hard disk for storage. If you
have data or files on the hard disk, please backup or copy
it to other place, or all the data will be cleared after format.
Step 1:
Use screwdriver to loosen the 4
screws on the corner of bottom
cover of Network Media Center.
Step 2:
Open the bottom cover, and you will
find a picture of HDD install direction
on the other side of bottom cover.
Step 3:
Put your 3.5" SATA hard disk into the
frame in the same direction as the
picture shown.
11
Advertisement
Table of Contents
