COMPRO C200 - START UP GUIDE Startup Manual

VideoMate C200 USB A/V Capture Stick
VideoMate C200 is an USB 2.0 interface analog video/audio input and capture device that
can input and directly convert analog video/audio from your DV camcorder, V8, VHS tapes,
DVD recorder, VCD Players, and camera to digital formats. Easily plugs into USB port on
PC or laptop, the Compro VideoMate C200 imports all your TV recordings, home video
recordings, favorite videotapes and any other video/audio collections into your hard disk.
The bundled Ulead VideoStudio 11 SE and Ulead DVD MovieFactory 5.5 SE software let
you create your own movies, and then you can burn it to VCD/DVD to share with your
friends. About the use of bundled software, please refer to the Ulead software on-line help
for more details.

System Requirements

CPU: P4 1.8 GHz or above
Graphics card supports DirectDraw and DirectX 9.0
Sound card or on-board sound chip
Memory：512 MB or 1GB depending on the system configuration
CD-ROM for install software
Windows XP SP2, Vista x86/x64

Software Installation

Step 1. Start the computer. Insert the installation CD into your CD drive.
Step 2. After starting, Windows will detect a new device and start the Add/Remove
Hardware Wizard. Please press Cancel and go to the next step.
Step 3. If you have Autorun enabled, the installer will start automatically.
(If Autorun is disabled, double-click on "setup.exe" on the installation CD.)
Step 4. After each program is successfully installed, press Finish to proceed.
Step 5. When installation completes, press Finish to restart computer.
Step 6. After install the C200 driver, you can intsall the Ulaed software as you need.
Start Up Guide