Recording Memos - AUDIOLINE VR R40 Operating Instructions Manual

RECORDING MEMOS

Ensure that the HOLD slide switch is in the OFF position
(slide switch down).
Press REC to switch the unit on.
Using the FILE button select the required archive file A, B, C
or D.
Now select the required recording mode SP (Standard) or
LP (Long-Play) using the MODE button. The selection will
be shown in the display.
To start recording, press the REC button once more. The
display shows the message "REC" and the red recording
LED illuminates. During recording, the length of the mes-
sage and the number of the message will be shown in the
display. Now speak into the microphone on the top of the
unit. The minimum recording time is 5 seconds.
You can break off recording using the MODE/PAUSE but-
ton.
Recording is ended by means of the REC button. Every
recording will be identified automatically with a number be-
tween 1 and 99.
If the maximum capacity of the selected archiving file is reached
or if the maximum recording time is exceeded, the display will
show the message "FULL". In order to be able to record new
memos you must first erase old or unimportant recordings.
Operation
27