Step 1:
Step 1:
Use a level ruler to mark two points on the wall according
Measure the hole distance according to the object, then
to the physical distance. Drill holes at the marked points,
mark it on the wall.
and hammer the anchors in.
根据实物测量好孔距,然后在墙上做好标记
Step 2:
Step 2:
Drill holes at the mark points
Screw the screws in (Not totally in, leave the screws out
for hanging). Then mount the item on the screws and pull
(5mm drill bit is recom-
mended) and hammer the
down it to fasten. (Please make sure the item is firmly
attached by screws before use.)
wall plugs into the holes.
(You can use long screws
directly on the wooden wall,
but for other walls, you need
在标记处打孔,然后将壁虎打入孔内
to hammer the wall plug
into the hole first, then use
long screws)
Step 3:
Step 3:
Finished.
Put the screws into the daywall anchors, attention not to
completely put the screws into the drywall anchors,
about 6-7mm should be left. Then hang the product on
the screws which are put into the drywall anchors from
将螺丝拧入壁虎中,注意不要完全拧入,需要预留一定的位置,
top to bottom and pull the product down to fasten it.
然后将产品挂入固定即可。
(This step is to make sure the product is securely fastened
with the used screws.)
Note:
Note:
1. Do not place the product in a place with high temperature, humidity, severe vibration and strong light. Keep the
1. Do not place the product in a place with high temperature, humidity, severe vibration and strong light. Keep the
product ventilated and dry.
product ventilated and dry.
2. Avoid hard objects or sharp objects colliding with the product. Do not hit the surface of the wood to avoid scratch.
2. Avoid hard objects or sharp objects colliding with the product. Do not hit the surface of the wood to avoid scratch.
3. When the product surface gets wet, just wipe it with a dry towel. Do not use detergent containing chemicals. Do not
3. When the product surface gets wet, just wipe it with a dry towel. Do not use detergent containing chemicals. Do not
use acidic liquid to clean. Please keep the product dry.
use acidic liquid to clean. Please keep the product dry.
Wood Boards
Wood Boards
3pcs(S/M/L)
2pcs
Large Screws
Large Screws
Drywall Anchors
4 pcs
6 pcs
6~7mm
Drywall Anchors
4 pcs
6 pcs
Wood Walls
Other Walls
Back
Wall
Wall
Need help?
Do you have a question about the 101000047-Alson-US-F4 and is the answer not in the manual?
Questions and answers