Page 2
Installa�on steps upper hole aligned with lower hole Fix the upper and lower iron pipes with M screws Two holes are on the same side insert the P into the holes of G as the groove of the board E Fix E and G plates with N screws from the bottom Insert the H board into the E board slot below...
Page 3
Fix the F board with N screws, Fix the I board with M srews from reverse side F board slot face down Fix the iron wire with M screws Tighten the four bottom screws...
Need help?
Do you have a question about the KJ6001 and is the answer not in the manual?
Questions and answers