QEEIG FS019-2 Instructions

Package Contents:
A
Bracket
UP
2PCS
E F
14PCS
Step1
Mark Holes Location
Step2A
For Wood Studs
Step2B
For Concrete or Brick Walls
5
4
3
1
2
[2B-1] Drill the holes.
Step3
Slide the Board [C] [D]Into Bracket [A]
WARNING: The holes on the boards facing down.
UP
A
C
UP
A
D
IMPORTANT SAFETY INFORMATION
NOT all parts and hardwares included will be used.
Each set additional included 1 screw and 1 anchor as backup.
DO NOT exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting,
incorrect assembly or in appropriate use.
Any concerns or questions, please feel free to contact our customer service. Thank you.
Instruction
Tools Required (Not included): Drill, Hammer, Screwdriver, Pencil
B
Bracket
1PC
G
Wall Screw Shelf Screw
M4x35
14PCS
I
UP
A
A
UP
6
7
Hammer the wall anchors [E]
[2B-2]
into the pre-holes.
Step4
Use Short Screw [G] Fixed the Boards
UP
G
UP
G
C
Board
Bracket Screw
H
M3.5x25
M3.5x20
4PCS
WARNING:
Wall anchors [C] are NOT necessary for this step.
Screw the bracket to the wall with arrow symbol
F
E
[2B-3]
Step5
WARNING: Board with side pre-drilled holes for basket.
G
G
MODEL: FS019-2
D Board with Pre-drilled holes
1PC
I Level
4PCS
WARNING:
A
UP
F
Screw the bracket to the wall with
arrow symbol upward.
Use Short Screw [H] Fixed the Basket
H
H
H
1PC
1PC
upward.
H