Advertisement
Quick Links
Wyze Cordless Vacuum Troubleshooting
⚫
How to Clean the Rolling Brush？
⚫
Changing the HEPA filter.
⚫
Emptying the dustbin
⚫
My Cordless Vacuum is losing suction.
⚫
My Cordless Vacuum is making weird noises.
⚫
What should I do if the floor brush stops spinning?
How to Clean the Rolling Brush？
During regular maintenance, the motorized brush should also be cleaned to
reduce the chance of clogging.
1. Remove any attachments by pressing the release key.
2. Press the brush release button, then pull to remove the brush.
3. Run a razor blade down the groove to break up any hair or debris as necessary, then
clean any that remain.
4. Slide the brush back into the housing until it clicks back into place.
⚫ Changing the HEPA filter.
Changing the HEPA filter can be done in a few quick steps:
1. Press the green button at the front of the handguard to release the dust
bin.
2. Remove the dust bin, and pull the HEPA filter out from the top.
3. From underneath the dust bin, twist the filter housing counter-clockwise,
then pull to remove it.
................................................................................................... 1
................................................................................................................... 1
............................................................................................................................ 2
........................................................................................ 2
........................................................................... 3
................................................................. 3
Advertisement
Summary of Contents for Wyze WCLVAC
- Page 1 Wyze Cordless Vacuum Troubleshooting ⚫ ....................1 How to Clean the Rolling Brush？ ⚫ ........................1 Changing the HEPA filter. ⚫ ..........................2 Emptying the dustbin ⚫ ..................2 My Cordless Vacuum is losing suction. ⚫ ................3 My Cordless Vacuum is making weird noises.
- Page 2 Note: The HEPA filter can also be rinsed with water, but needs to be dried completely before being reinstalled. ⚫ Emptying the dustbin Emptying the Wyze Cordless Vacuum is designed to be easier and more mess-free to empty than the competition. To Empty your Dust Bin: 1.
- Page 3 Troubleshooting: 1. Turn your cordless vacuum off. 2. Check for any clogs that could be in the brush, attachments, or tube assembly. 3. Empty the dust cup and tap off any debris out of the HEPA filter. ⚫ My Cordless Vacuum is making weird noises. Presents as: Your cordless vacuum is making weird noises when it is being used.
- Page 4 ◼ Press the button on the side of the brush to remove the brush bar. ◼ Use your fingers or (carefully!) a blade to clear any snags that are blocking the brush. ◼ Reinstall the brush bar into the floor brush head. ⚫...
Need help?
Do you have a question about the WCLVAC and is the answer not in the manual?
Questions and answers