Download Print this page
Pyle PMP73IN User Manual
Pyle PMP73IN User Manual

Pyle PMP73IN User Manual

Lightweight and portable megaphone bullhorn

Advertisement

Quick Links

OPERATION
Open the Back Cover. Remove the plastic battery sleeve
and insert 8 nos. UM-2 cells with correct polarity, insert the
sleeve into the battery compartment according to the
instructions in the compartment. Then close the back cover
until it locks. Now your megaphone is ready for action.
You can also open the back cover, remove the plastic battery
sleeve and insert one 12V rechargeable battery then close
the back cover until it locks.
TALK OPERATION
Dial the toggle switch to MIC and then press the power key
on MIC, the indicator lights up, and then you can now speak into the microphone.
Toggle power switch to ON, press the POWER on the MIC, then the indicator lights up. Now the megaphone is ready
for the following function operation:
TALK Operation: Mic is powered on without pressing any key, the microphone can be used as propaganda ampli cation.
Short press SIREN to play alarm sound. Press again to turn o .
Short press on the WHISTLE to activate whistle sound. Press again to turn o .
Short press AIR to broadcast 119 sound. Press again to turn o .
AUX Operation: Connect one end of your phone or MP3 player with 3.5 audio cable, and insert the AUX of mic into the
other end to play.
www.PyleUSA.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the PMP73IN and is the answer not in the manual?

Questions and answers

Summary of Contents for Pyle PMP73IN

  • Page 1 OPERATION Open the Back Cover. Remove the plastic battery sleeve and insert 8 nos. UM-2 cells with correct polarity, insert the sleeve into the battery compartment according to the instructions in the compartment. Then close the back cover until it locks. Now your megaphone is ready for action. You can also open the back cover, remove the plastic battery sleeve and insert one 12V rechargeable battery then close the back cover until it locks.
  • Page 2 TO REPLACE BATTERIES 1. Loosen the locking screw of the battery compartment cover on the back of the body. The battery compartment cover comes o . 2. Insert 8 x type-C (UM-2) batteries in the battery case observing correct polarity. 3.