Download Print this page

KEONJINN B0BJ73JZZB Installation Instructions

Bathroom led mirror

Advertisement

Quick Links

Dimension
Size
24" x 36"
61 x 91 x 3.6cm
28" x 36"
71 x 91 x 3.6 cm
40" x 24"
101 x 61 x 3.6 cm
40" x 32"
101 x 81 x 3.6 cm
48" x 30"
121 x 76 x 3.6 cm
60" x 36"
152 x 91 x 3.6 cm
72" x 36"
182 x 91 x 3.6cm
PARAMETER
Color Temperature
Input Voltage
Output Voltage
CRI
Working Temperature
Life Span
Anti-fog
Nema Rate
Wiring Method
Switch
Touch Sensor & Microwave inductive
Watts
Lumens
36W
5500LM
36W
6000LM
36W
6200LM
36W
7000LM
36W
7600LM
48W
9700LM
60W
11000LM
SPECIFICATION
3000K-6000K
AC100-120V
12V DC
≧90 Ra
-20~45 ℃
50000 hours
Yes
3
Hardwired / Plug In
BATHROOM LED MIRROR
If you have any problem, please feel free to contact us on
sales@keonjinn.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the B0BJ73JZZB and is the answer not in the manual?

Questions and answers

Summary of Contents for KEONJINN B0BJ73JZZB

  • Page 1 12V DC ≧90 Ra Working Temperature -20~45 ℃ Life Span 50000 hours Anti-fog Nema Rate Wiring Method Hardwired / Plug In Switch Touch Sensor & Microwave inductive If you have any problem, please feel free to contact us on sales@keonjinn.com...
  • Page 2 Note: After opening the package, Please inspect the product Note: Thank you very much for using keonjinn products, in order immediately for damage in transit or missing parts. If there is to facilitate the use of keonjinn products, please read this instruction any missing, Please contact us by (sales@keonjinn.com) or you can...
  • Page 3 1.Before installation, please lift the mirror against the wall, keep an Radar motion sensor appropriate safety distance from the faucet, confirm the installation position and installation height of the bracket, use a spirit level to level Light touch the bracket, and mark the hole position on the wall. Anti-fog and Radar sensor light switch The mirror can be hung horizontally or vertically.
  • Page 4 3.Mount the bracket to the wall with screws. If you want to connect power wires to plug, you can refer to the steps: ① Remove the plug cover. ② Unscrew the screws on each of the plug's pins. Ground Wire (green line) ③...

This manual is also suitable for:

B0bj73t71r