Franklin Sports 12370 Manual

STEP 1
F
D
A C
K
H
G
STEP 2
NOTE:
Position net on goal frame with colored
tape markers in the locations shown.
YOU ARE NOW READY TO PLAY!
Made In China
Franklin Sports Inc.
Stoughton, MA 02072
NOTE
Assemble all posts as
E
shown.
Welded net loops
must face the correct
direction for net
attachment.
B
Be sure all pieces are
completely inserted
until locking buttons
I
snap into place.
J
G
NOTE
Use the rope ties to
attach net to the
welded metal loops.
Begin by tying one of
the ropes to the top
center of net.
Weave the rope
through the welded
loops and
the reinforced
perimeter of the net.
Continuously pull the
rope tightly as you
attach the net
perimeter to the
welded loops.
Tie off rope at the
back bottom of the
goal with a secure
knot, cut off excess,
and repeat with the
second rope on the
other side.
For replacement parts:
Visit: franklinsports.com/instructions
Email: parts@franklinsports.com
Call: 1-800-225-8649
28IN x 20IN
(71.1cm x 50.8cm)
MINI STEEL GOAL
12370 12370X
ITEM NUMBER:
Proper protective equipment should be worn
whenever these hockey products are used.
Adult assembly and supervision is recommended.
NOTE: PRINT FRONT TO BACK