Advertisement
Quick Links
Installation Manual
Firstly be sure to decide whether the wire bundle need to be towards the driver side or passenger side by testing
when signals lights work properly.
Peel
After cleaning and dry the mounting surface. Peel off the adhesive tape at the back.
Stick
According to the mounting direction of the wire bundle, stick the light bar to the recessed area between the bottom
of the tailgate and the bumper shelf.
Electrical Hook-up
Plug and play the standard flat 4-pin connectors, connect the reverse wire to a 12V DC positive power source.
Advertisement
Summary of Contents for Nilight TR-104-A
- Page 1 Installation Manual Firstly be sure to decide whether the wire bundle need to be towards the driver side or passenger side by testing when signals lights work properly. Peel After cleaning and dry the mounting surface. Peel off the adhesive tape at the back. Stick According to the mounting direction of the wire bundle, stick the light bar to the recessed area between the bottom of the tailgate and the bumper shelf.
- Page 2 Additional Hardware You can also add on an additional mount and screws we provide to secure the light bar.
Need help?
Do you have a question about the TR-104-A and is the answer not in the manual?
Questions and answers