Advertisement
Quick Links
Abnormal
phenomenon
1.Low power of tire sensor
2.Radio interference nearby
3.Product battery is low or below
A:Products can
not work
5.Tire pressure sensor is not original
Possible cause
1.Wrong Vehicle model
9V
4.Wrong operation
Solution
Suitable for light trucks, but not
heavy trucks
1. Keep the tire pressure sensor
fully charged
2.Repeat several activations
1.Moving vehicle to another
location
2.Repeat several activations
1. Replace the battery to ensure
the product battery is not lower
than 9V
1. When using, contact the
device's emitter with the tire
sidewall 90 ° vertically
2. After testing a tire, you need
to turn off the device and then
press the launch button again
to activate the next tire
3. When activated, you only
need to press the button once,
you cannot keep pressing the
button
Original sensor, or the same
protocol as original sensor supports
Solution
way
Contact
seller
Custom
er can
solve
Advertisement
Summary of Contents for VXDAS Super EL50448
- Page 1 Abnormal Possible cause Solution Solution phenomenon Contact seller Suitable for light trucks, but not 1.Wrong Vehicle model heavy trucks 1. Keep the tire pressure sensor 1.Low power of tire sensor fully charged 2.Repeat several activations 1.Moving vehicle to another location 2.Radio interference nearby 2.Repeat several activations 1.
- Page 2 Entering from the center control or dashboard, different vehicles go in different ways, but make sure to enter the learning mode instead of 6.Did not enter learning mode using it directly. (Normal vehicles will automatically exit the learning mode after 2 to 3 minutes) Different vehicles require different times to reset all tire sensors after 7.The operation is too urgent...
Need help?
Do you have a question about the Super EL50448 and is the answer not in the manual?
Questions and answers