JVC HAFX41WB Troubleshooting

> Troubleshooting
Troubleshooting
Symptom
Unable to pair
The indicator
flashes in red and
connection cannot
be completed
After connecting to
this unit, the
BLUETOOTH device
connected does not
function
immediately
The volume is low
or the sound is
unpleasant
The sound is
distorted
The sound is
choppy and there
is noise
Do not release the
alternately in red and blue.
When pairing, make sure the BLUETOOTH device is within
1 m of this unit.
Turn on the BLUETOOTH device and enable pairing.
Delete the pairing information on the BLUETOOTH device
list and perform pairing again.
Refer to the page on connection.
Turn on the BLUETOOTH device, enable its Bluetooth
function and select this unit from the BLUETOOTH device
list.
Depending on the BLUETOOTH device connected, even
when the indicator turns blue after connecting to this unit,
the BLUETOOTH device may not function immediately due
to the time lag in the connection operation. Wait for a few
seconds and try operating again.
Increase the volume on this unit or the BLUETOOTH device
connected.
Insert the ear pieces more securely.
Change the size of the earpieces.
Adjust the volume on the BLUETOOTH device connected so
that there is no distortion, and then adjust the volume on
this unit.
Re-charge unit. Charging
Change the position of the BLUETOOTH device connected
to a position and direction where communication is stable.
Try reducing the number of apps running on the
BLUETOOTH device connected.
Charge this unit.
Action
button until the indicator flashes
Connecting
Audio operation
Charging