ITC Fontana 97022 Installation Instructions

Fontana
™
Shower
Part#: 97022 & 97023
PARTS/TOOLS NEEDED:
Black Rubber
Exterior Shower
Washers
INSTALLATION INSTRUCTIONS:
• Choose a location that is flat and has a minimum of 10" of rear clearance for hose and water connections.
• Using the dotted line on this sheet as a template, cut the opening for the main body of the shower.
• Apply Teflon tape to center water valve. Use black rubber washers (included) to screw female sprayer hose
connection to male collar.
• Insert the shower and mark the four #8 flat head screw holes on the mounting surface.
• Caulk the mounting flange with suitable weather resistant, flexible sealant material.
• Mount shower to opening and drive in screws (included) until secure.
• Connect the faucet set to the on-board water system.
SPECIFICATIONS:
• Designed for use in a pressure regulated, portable water system with a maximum operating pressure of 40
PSI.
• Maximum flow rate with the faucets fully opened - 2.5GPM.
• DO NOT ALLOW TO FREEZE.
• Do not connect directly to a high pressure residential water supply.
97022-A-5
Latching Shower
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
Exterior
Mounting
Screws
Locking Shower
INSTALLATION INSTRUCTIONS
Electric Jigsaw Power Drill
(not provided) (not provided)
97023-A-5
For warranty information please visit www.itc-us.com/warranty-return-policy
Teflon Tape Exterior Caulk
(not provided) (not provided)
Rev A • 06/17/19
Page 1 of 1