Advertisement
Quick Links
INSTRUCTIONS
How to connect APP？
Please note that the following conditions need to be met before
connecting :
1. The IOS mobile phone system must not be lower than version 7.1, and must
support Bluetooth BLE 4.2, iPhone 4S or above mobile phones.
2. The Android system is required to be version 4.3 or above, and it needs to
support Bluetooth BLE 4.2.
3. The wireless transmitter in the device only records the user's data and sends it
to the mobile APP when it is connected to the mobile phone. Before starting the
sports equipment, please connect the application to the equipment to ensure
that the data recorded in the mobile application is true and valid.
4. When the transmitter does not receive any signal for 4 minutes, it will enter
sleep mode. In sleep mode, the mobile phone will not be able to search for the
transmitter. At this time, you need to use the device to wake up the Bluetooth
transmitter.
Description of "KINOMAP" connection
Tips: Since the KINOMAP official software connection steps will be updated in
real-time, this connection process is only for reference.
1.1 Search "KINOMAP" in mobile app store to download app.
E-mail：feierdun01@sina.com
Advertisement
Summary of Contents for FEIERDUN Feier-EM-01
- Page 1 INSTRUCTIONS How to connect APP？ Please note that the following conditions need to be met before connecting : 1. The IOS mobile phone system must not be lower than version 7.1, and must support Bluetooth BLE 4.2, iPhone 4S or above mobile phones. 2.
- Page 2 1.2 After the download is completed, open the app and register the personal information. Turn on the Bluetooth of the mobile phone to ensure that the transmitter is powered on and in the wake-up state. 1.3 Add sports equipment as follows:...
- Page 3 1.4 Add equipment to complete, start your exercise! NOTE！ Our Products Model : Feier-EM-01 How to get a good after-sales service? Thank you very much for choosing our products, we will do our best to serve you, if you encounter any problems during installation or use, please contact our after-sales team at first! E-mail：feierdun01@sina.com...
- Page 4 How is the control center used? 1. Item description Item Type Display Description Heart rate BPM Heart rate Real-time heart rate if support Heart rate, Otherwise off Level 1 ~ 32 Scan ON：”SCAN” mode mode OFF：”LOCK” mode 0.0 ~ 9999 km/h Speed 60RPM - 21.5 km/h 00:00 ~ 99:59...
-
Page 5: Display Description
2. Display description 1. 24 effect lights on the outer ring. 2. Heart rate can be showed in “ ❤ ” by “bpm”. 3. Resistance can be showed in “LEVEL” Overvie from 1 to 32. 4. "Speed"&"Time"&"Distance"&"Calori es" can be showed. 5. - Page 6 3. Main Operation Instructions Item Item type Display Description 1. In “SLEEP” state, the display is off. Sleep/Wake 2. The knob can be wake up by pressing or riding 1. If there is no operation or riding, the knob will sleep after 3 minutes 2.
- Page 7 4. Detailed Operation Instructions ① After energized,The BUZZER beeps, and the knob lights up and enters the “READY” state (Figure 1); After power-on, the resistance level automatically reset to "1".No operation for 3 minutes, the display is off and enter standby state .(Figure 2) ②In “READY”...
- Page 8 ③ "Speed"&"Time"&"Distance"&"Calories" are showed in main window in default “SCAN” mode.“SCAN” lights up，The datas switch every 3s.(Figure 5 , Figure 6 , Figure 7 , Figure 8)
- Page 9 ④ A short press to enter “LOCK” mode, “SCAN” is off. The locked data can be:"Speed"/"Time"/"Distance"/"Calories"(Figure 9 , Figure 10 , Figure 11 , Figure 12)
Need help?
Do you have a question about the Feier-EM-01 and is the answer not in the manual?
Questions and answers