ã= Safety instructions Warning Knives and other utensils with sharp points Delivery must be placed in the cutlery basket with the points downwards or horizontally on – Check the packaging and dishwasher immediately for damage caused in the knife shelf *. transit.
Damage Getting to know your – The appliance may be repaired and appliance opened up by a technician only. To do this, disconnect the appliance from the Diagrams of the control panel and the power supply. Pull out the mains plug interior of the appliance can be found in or switch off the fuse.
Water hardness table Water softening system :DWHU +DUGQHVV PPROO 6HW YDOXH To ensure good washing results, the KDUGQHVV UDQJH RQ WKH dishwasher requires soft water, i.e. YDOXH PDFKLQH containing low amounts of lime, otherwise &ODUNH white limescale will be deposited on the ¯¯...
Switching off salt refill indicator/ Special salt $ water softening system If the salt refill indicator h is impaired Using special salt (e.g. when using combined detergents Always refill with special salt immediately containing salt component), it can be before switching on the appliance. This switched off.
Setting amount of rinse aid Rinse aid % The amount of rinse aid can be set from to : . Please set rinse aid on As soon as the rinse-aid refill indicator ` to obtain very good drying results is lit on the fascia, there is still a rinse-aid is already set in factory).
Loading the dishwasher Utensils – Remove large food remnants. It is not necessary to prerinse utensils under Not suitable running water. – Cutlery and utensils made of wood. – Place the utensils so that – Delicate decorative glasses, craft and –...
Pans Cutlery basket Bottom basket 1b You should always place cutlery unsorted with the points downwards. To prevent injuries, place long, pointed implements and knives on the knife shelf. Etagere * The etagere and the space underneath can be used for small cups and glasses or for larger items of cutlery, such as Heavily soiled utensils (pans) should wooden spoons or serving cutlery.
Folding spikes * Knife shelf * * depending on model * depending on model The spikes can be folded down to improve Long knives and other utensils can be arrangement of pans, bowls and glasses. arranged horizontally. You can remove the knife shelf to wash taller utensils.
Top basket with side levers Detergent – Pull out the top basket 1" out. – To lower the basket, press in the left You can use tablets as well as powder and then the right lever on the outside or liquid detergents for dishwashers, but of the basket.
Adding detergent If the utensils are only lightly soiled, slightly – If the detergent dispenser 9" is still less than the indicated amount closed, press the lock 9* to open the of detergent is usually adequate. detergent dispenser. Suitable detergents and care products Pour detergent into the dry detergent can be purchased online via our website dispenser 9"...
Page 14
Notes – You will obtain optimum rinsing and drying results by using solo detergents and applying salt and rinse aid separately. – If programmes are short, tablets may not have full cleaning effect due to different dissolving properties and there may even be undissolved detergent residue.
Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. Type of utensils Type of soiling Programme Possible additional Programme sequence options Prerinse very adhesive burned- ±...
Additional options Washing the dishes Programme data * depending on model Additional options can be set with the The programme data (consumption buttons X. values) can be found in the summary of instructions. They refer to normal Ÿ Express Wash/ Speed conditions and the water hardness set value : .
Remaining running time display Switching off automatically after the end of the programme * When the programme is selected, the remaining running time of the programme * depending on model is indicated on the digital display H. To save energy, the dishwasher is The running time is determined during the switched off 1 minute after the programme programme by the water temperature, the...
Intensive drying ã= Warning The final rinse uses a higher temperature At the end of the programme please open which improves the drying result. The the door fully and not partially when running time may increase slightly. emptying the dishwasher. Any escaping (Caution if utensils are delicate!) water vapour could damage sensitive –...
Filters Maintenance and care The filters 1R keep large foreign objects in the rinsing water away from the pump. A regular inspection and maintenance of These foreign objects may occasionally your machine will help to prevent faults. block the filters. This saves time and prevents problems.
Spray arms Troubleshooting Limescale and contaminants in the rinsing water may block nozzles and bearings on The majority of faults which could occur in the spray arms 1: and 1B. daily operation can be rectified by the – Check outlet nozzles on the spray arms user.
Waste water pump ... when the appliance is switched on Large food remnants in the rinsing water not retained by the filters may block the The appliance does not start. waste water pump. The rinsing water is – The mains fuse has tripped. then not pumped out and covers the filter.
– Filter in the water supply blocked..during the wash cycle – Switch off the appliance and pull Unusual foam formation. out the mains plug. – Handwash liquid in the rinse aid – Turn off the tap. dispenser. – Clean filter in the supply hose. Spilled rinse aid causes excessive frothing, therefore please remove with a cloth.
White stains on the utensils/glasses Customer service remain milky. If phosphate-free detergents are used with If the advice given does not resolve your hard tap water, white deposits may be problem, please contact your customer deposited more easily on utensils and service.
– Install built-under or integratable Installation appliances only under continuous worktops which have been screwed to The dishwasher must be connected adjacent cupboards to ensure stability. correctly, otherwise it will not function – Do not install the appliance near heat properly.
Technical specifications Waste-water connection Weight: – The required work sequence can be found in the installation instructions. If max. 60 kg required, fit a siphon with an drainage Voltage: connection. 220–240 V, 50 Hz or 60 Hz – Connect the waste-water hose to the Connected load: drainage connection of the siphon with 2.0–2.4 kW...
Warm water connection Electrical connection * depending on model – Connect the appliance to an alternating current only, ranging from 220 V to The dishwasher can be connected to cold 240 V and 50 Hz or 60 Hz via or hot water up to max. 60 °C. a correctly installed socket with Connection to hot water is recommended protective earth conductor.
Transportation Waste disposal Empty the dishwasher and secure loose parts. Both the packaging of new appliances and Drain the appliance according to the the old appliances themselves contain following steps: valuable raw materials and recyclable materials. – Turn on the tap. Please dispose of the individual parts –...
Need help?
Do you have a question about the BM6224 - annexe 2 and is the answer not in the manual?
Questions and answers