Advertisement
Quick Links
Install Guideline
Step 1 Place to Install
①The MT158 unit is portable, you may go through frequent connections and disconnection for the
gas pipe, so we strongly suggest you install the unit away from the main building or RV.
② Vertical installation; DO NOT tilt or position horizontally.
Step 2 Put Batteries in Place
Press "ON" at the bottom of the unit and install the 2D cell batteries
Advertisement
Summary of Contents for FVSTR MT158
- Page 1 Install Guideline Step 1 Place to Install ①The MT158 unit is portable, you may go through frequent connections and disconnection for the gas pipe, so we strongly suggest you install the unit away from the main building or RV. ② Vertical installation; DO NOT tilt or position horizontally.
- Page 2 Step 3 Water Pipes Connection ① Connect the inlet and outlet water pipe. As for the inlet water pipe you can choose a garden hose adapter or a quick connector. ② Use the Teflon tape at the inlet and outlet to avoid water leakage. ③...
- Page 3 ② If the outside temperature is around or below 36℉/2℃, please use the drain plug and remove the inlet and outlet pipes to discharge the internal water to avoid the heat exchanger from permanent damage due to freezing. ‘’FVSTR, your trusted companion for warmth and comfort in every setting.’’ Email Address: supergroupcb@gmail.com...
Need help?
Do you have a question about the MT158 and is the answer not in the manual?
Questions and answers