NGI N68000 Series Manual

ELECTRONIC SOLUTION PROVIDER FOR INTELLIGENT MANUFACTURING
N68000 Series High Power DC Electronic Load
Product Introduction
N68000 series is developed based on NGI's years of experience in testing for power supply, car charger, battery and supercapacitor.
It is with high accuracy, high reliability and high cost performance.It has CC, CV, CP and CR mode. N68000 series supports SEQ
test, dynamic test, charge test, discharge test, OCP test, etc. The power range covers from 2.4kW to 14.4kW.
Application Fields
Charging station, car charger
DC-DC power supply, server power supply
Communication power supply capacitor module, battery pack
Main Features
Power range: 2.4kW to 14.4kW
Voltage range: 150V/600V/1000V
Operation modes: CC/CV/CR/CP
High power density, minimizing space occupation
Transient over-power loading capability
Programmable sequence test function(SEQ), up to 100 groups sequence files, up to 50 steps per file
Comprehensive MOS protection
Multiple protection: OCP, OVP, OTP, OPP and reverse polarity warning
Analog programming interface(APG), current monitoring interface, and remote/local trigger function
Multiple communication interfaces: LAN/RS232/CAN
High reliability design
N68000 series has a comprehensive MOS protection circuit. No matter how much MOS is damaged, it will not cause short-circuit
between the positive and negative polarity or the positive polarity and the control circuit. The damage of some MOSs does not
accelerate the damage of others, which can be used continuously.
High current relay
Energy storage system
CR/CP function supported by hardware
Charge test, Discharge test and OCP test
Built-in ESR test function(Optional)
Editable rise and fall slew rate
Editable Von/Voff
01