TIMBER RIDGE B0CB9TF899 Instructions For Use

PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE USING THE LOUNGER!
Figure 1
Use one footto hold down the
front chair leg.
STEP 1
Make sure the locking levers are in the unloc kposition.
Stand behind chair and hold upright.
Place one hand on top of the plasticarmrest,
and theother hand on top of backrest.
Figure 4
Pull out side table from under the chair ,rotate, and lock securely on front leg
pin.Store table in reverse sequence.See Figure 4.
CAUTION
INSTRUCTIONS FOR USE
IMPORTANT!
Figure 2
Pull chair back towards
you while pushing down
on armrest
STEP 2
Pull chair back towards you while pushing down on the armrest.
The chair should open easily.
If chair does not open, do not force!
Again, make sure locking levers are in the unlock position
and that you are pulling the chair back towards you.
INSTRUCTIONS FOR USE
6.
Make sure that the levers are unlocked before
openning the lounger.To change position or sit up,
unlock the levers first, and then change position.
Re-lock the levers when you have found the position
you desire
Figure 3
Unlock levers priorto
changing positions.Re-lock
levers when you havefound a
comfortableposition.
LOCK
STEP 3
To change position first, unlock the levers first,
on both sides of chair.
Re-lock the levers when you have found
the position you desire.
USE AND CARE
LOCK