Fersgo FSG-KTSA01 Installation Manual

Installation Guide
FSG-KTSA01
STEP 1 Install the brackets and the back bumper to the track
Alternative
position
FRONT
Please do not over-drive the screws.
You may install the center bracket at the alternative position
or remove it, depends on the structure of your desk in STEP 1.
We recommend using longer drill bit or screw driver on the inner
screws labled with for lesser e ort in STEP 2.
This elevation kits works only with FERSGO KTS Series Keyboard Trays.
FERSGO
Track Elevation Kits
for KTS Series Keyboard Trays
Product designed and assembled in Taiwan.
Meet BIFMA x 5.5 Standard.
For home and o ce use only.
Please visit fersgo.com for more supports.
STEP 2 Install the elevated track to your desk
BACK
STEP 3 Install the front bumper after inserting the articulating arm
Tools Required:
Power drill
Push back the arm
to the end
(Keyboard Tray is not included in this package)
Screw Driver