ACDelco 22756465 Instruction Sheet

KEY FOB PROGRAMMING INSTRUCTIONS -
22756465, 22756466
FOR AUTOMOBILES:
These vehicles can be programmed using the
instructions below:
• 2008-2010 Cadillac Escalade
• 2008-2010 Cadillac Escalade ESV
PROGRAMMING INSTRUCTIONS
This procedure will erase all previously learned transmitters. Therefore,
they must be relearned as additional transmitters.
1. Press the vehicle information button
LEARN REMOTE KEY displays.
2. Press the set/reset button until REMOTE KEY LEARNING ACTIVE
is displayed.
3. Press and hold the lock and unlock buttons on the first transmitter
at the same time for about 15 seconds.
On vehicles with memory recall seats, the first transmitter learned
will match driver 1 and the second will match driver 2. A chime will
sound indicating that the transmitter is matched.
4. To match additional transmitters at this time, repeat Step 3. Each
vehicle can have a maximum of eight transmitters matched to it.
5. To exit the programming mode, you must cycle the key to LOCK.
These vehicles require the use of a professional scan
tool for programming (see your local GM dealer or
ACDelco Professional Service Center):
• 2011-2014 Cadillac Escalade
• 2011-2014 Cadillac Escalade ESV
until PRESS  TO RE-
INSTRUCTION SHEET