Motor Trend BDSC-278 Installation Manual

BENCH SEAT COVERS
FOR REAR SEATS
INSTALLATION GUIDE /
1. Place the protector over the rear
seat and extend the sides
covering the cushion base.
Coloque el protector sobre la
base del asiento posterior y
extienda los lados que cubren la
base.
WARNING: This product has been designed and tested to be compatible with side impact airbags. However hasn't been tested with all
vehicle models and years. For some vehicles the seat cover may a ect the operations of the mounted side airbag system, which could
increase the change of serious injury in case of an accident. Check manufacturer manual and air bag position before installing this
product on your vehicle.
2. Insert the push bar into middle
folding of the seat to secure the
protector in place.
Inserte la barra entre el respaldar
y la base, para que el covertor
quede seguro y no se deslize.
GUIA DE INSTALACIÓN
3. Bring the strap around the back
of the headrest and attach the
clip. Tighten to align and secure
the cover.
Pase la correa por detrás de la
cabecera y ajustela hasta que
quede firme.