Olafus -01SK Troubleshooting

Problem
After TWS networking, the
sound is synchronized but
not the lights
Unable to pair TWS
Unable to connect to
Bluetooth device
Bluetooth connection
disconnected
Stop pairing with each
other
A popping sound occurs
Troubleshooting
Press the "Light Mode" button
Before connecting to the phone, pressing the "TWS" button
pair it with TWS Mode sound.
1. Before connecting to the phone, turn on both speakers at the same time. Press the "TWS" button
any speaker once. It will automatically pair with a TWS mode sound, indicating successful pairing.
2. If the speaker is already connected to the phone, turn off both speakers, delete the speakers in the phone
settings, and then follow the first step.
The distance between the phone and the speaker cannot exceed 8 meters.
After the two speakers are turned off and then turned back on, without connecting to the phone,
press any one of the speakers and press the "TWS" button
will be paired automatically and accompanied by the TWS Mode sound.
Volume reduction and timely charging.
Solution
once on either speaker to synchronize the light mode.
once on either speaker will automatically
once, it
on