Page 3
SINGLE PAN MACHINE SKETCH DOUBLE PAN MACHINE SKETCH DISPLAY SKETCH 1. Flat pan 50/70cm diameter round pan or 50x50cm square pan, stainless steel material. ① The button is for temperature increase setting. ② The settings button is used to set the temperature. ③...
OPERATION METHOD 1. Make sure the machine to be placed smoothly. 2. Connect the machine to the electricity apply, 110V/ 60HZ. ⑦, the machine is connected properly. 3. Turn on the power switch ④. 4. Turn on the machine by the button ②...
PRECAUTIONS Electricity - Install the earthing device According to the National Security Standard for electrical equipment. - Only use the feed line, method of wiring and equipment in conformity with the National Security Standard for electrical equipment. -Be sure installing a short and leakage protective device on the feed line.
Page 7
CIRCUIT OF SINGLE PAN MACHINE CIRCUIT OF DOUBLE PAN MACHINE THE PC BOARD ERROR CODE DISPLAY Error Code Fault Diagnosis Overcurrent protection Bad connect of precooling sensor Bad connect of main sensor High pressure side overpressure Low pressure side overpressure...
Need help?
Do you have a question about the KO600E and is the answer not in the manual?
Questions and answers