beautyrest 022164282597 Setup Instructions

Wifi Controller Setup and Use
VOICE CONTROL SETUP
Set Up Instructions for Alexa:
1) Open Alexa app select "Skills and Games"
2) Search for "Secure comfort"
3) Select "Disable skill"
4) Now select "Enable skill"
5) App will ask to Agree and link then select "Next"
6) Select "Settings"
7) Select "Set up a device"
8) Type in "secure comfort"
9) Select "Agree and link"
Commands include:
· "Turn <device name> On"
· "Turn <device name> Off"
· "Turn <device name> to (1-20)"
· "Turn <device name> Preheat On"
· "Turn <device name> Down"
· "Turn <device name> Up"
· The Device name set in the app will be used during commands.
· Temperature settings must be from 1-20.
Each blanket controller is an individual device.
For King and Queen products with 2 controllers, step 3 through 10 should be performed for each controller.
1) Install app
Use Qr code or the links below or search for the "Secure Comfort" app
the on app store.
For IOS: https://apps.apple.com/us/app/secure-comfort/id1582210299
For Android: https://play.google.com/store/apps/details?id=com.
SmrtBlkt1.smart
2) Create account/Log in on app.
3) Connect controller to blanket then plug into a wall outlet.
With controller off, hold right (High) button until display shows "Cr"
Device is now ready for pairing.
4) Select Home at bottom of screen.
Select "+" icon then " Add device".
Allow permissions the app is requesting.
Select "Add" next to discovering devices.
Allow the app to search for the device, do not try to add a device
manually.
If you receive a timeout error, see troubleshooting section below.
5) When prompted, select "Manual input" and enter your Wifi router
name and password.
NOTE: Your phone must be connected to the same Wifi network
you are using for the blanket controller.
6) Select device to add and "next"
7) Select Done
8) Open the app and name the blanket. See details below on naming
your blanket.
9. Use the pencil Icon to open the edit screen. Select and change the
name as needed.
10. For Queen and King sizes, repeat steps 3 through 10 for the other
controller.
1
APP LAYOUT AND FUNCTIONALITY
This is the Home Screen.
This button returns you
to the home screen.
3
SETUP INSTRUCTIONS
NOTE: Only one digital device/app can be connected to a controller at
a time.
To Change device name:
1) Select device to change.
2) Use Pencil Icon to open edit screen.
3) Pencil Edit icon again on device you are changing.
4) Select Name and change as needed.
To check Controller/Device Status:
App Icon
Press the center button quickly to display device status.
"S0" Device is reset and waiting to connect
"S4" Device is connected to Wifi
NOTE: This device will only operate on 2.4GHz router bands, with
IEEE 802.11 B/G/N compatibility. See Step 5 and Troubleshooting
steps for information on the Wifi signal.
Troubleshooting steps:
The controllers will only operate on 2.4Ghz Wifi networks.
Be sure to put the controller in pairing mode, hold the Right (High)
button until you see "CR" on the screen.
During setup, a "Device adding timeout" or similar error can be
caused by:
1) Your phone is not on the same Wifi network you are setting the
controller up on.
2) The Wifi network is not a 2.4Ghz frequency. Most modems,
routers and internet providers work on both 2.4Ghz and 5.0Ghz
frequencies. If you are unable to connect and aren't sure what
frequency your Wifi is operating on, please refer to your modem/
router manual or contact your internet provider.
3) Controller was not put in pairing mode. Hold the right (High) button
on the controller until the display shows "CR"
During setup, a "Failed to Connect to the router" or similar error
can be caused by:
1) Incorrect network name entered.
2) Incorrect Password entered.
This is the blanket that has been set up as per the instructions.
Note that on a queen and king sized bed, there will be two devices
connected. One digital device/app can operate both controllers.
However, Only one digital device/app can be connected to a
heated controller at a time, so if two people are sharing a queen or
king blanket, we recommend that each set up their portion of the
blanket separately.
This allows you to change personal info
and also for set up of Alexa and Google
Assistant voice commands.
This button is only of use if
you have other Tuya devices
set up in your home.
2
4