Advertisement
Quick Links
Extend the Life of Your Machine
The water must be filled into the tank before plugging in
the power cord, and the water level should not exceed
MAX
the maximum water level.
Do not add abrasives or corrosive chemicals to the water
tank. Do not put non-waterproof phone or watch into the
water tank to clean it.
It is recommended to keep the cleaner away from heat and
humid environment. Please be aware of the danger of falling
into water or other liquids.
Do not operate without water or use hot water, and do not
let the jewelry cleaner run for more than 30 minutes without
cooling down. Otherwise it will affect the service life of the
jewelry cleaner machine.
No water
Advertisement
Related Manuals for Aocktobar ZX-895
Summary of Contents for Aocktobar ZX-895
- Page 1 Extend the Life of Your Machine The water must be filled into the tank before plugging in the power cord, and the water level should not exceed the maximum water level. Do not add abrasives or corrosive chemicals to the water tank.
- Page 2 Item cleaning attention 1.It is best to face up to avoid friction between the lens and the bottom before cleaning the glasses,. Please note: Spectacle frames or lenses that are worn or cracked cannot be used for ultrasonic cleaning. 2.For excessive oily surfaces (such as sweat stains on the surface of glasses, oil stains) and jewelry, you can use alkaline cleaners such as hand sanitizer, soap, dishwashing liquid etc.
Need help?
Do you have a question about the ZX-895 and is the answer not in the manual?
Questions and answers