ICStation GY20599 Instructions

www.amazon.com/shops/icstation
1. There are 4 function buttons ,such Up button, Down button , SET button, OK button.
2. How to set time ?
(1) After Short-press the SET button, the T1 digital tube will flash.During this period,you can set
time via the UP ,DOWN button.After you finish the above steps, please short press the SET
Button again.The T2 digital tube will flash, you can set the time via UP, DOWN button. There are 2
ways to save data,for example , you can wait 6 seconds until the digital tube stop flashing,the
system will save data automatically; you can also short press the SET Button again to save data.
3. How to set parameter?
Timer Easy Setting Instructions
The upper display is referred to as (T1 or PV) and the lower display is referred to as (T2 or SV).
The LED labeled "out" indicates that the relay contacts are closed when it lights up.
Time set mode:
Short Press the SET button and use the up and down buttons to set the time in the Top display(T1
or PV) short press the set button to set the time displayed in the bottom display (T2 or SV) short
press the set button again to save and run.
ICStation Digital Timer Relay AC 85-265V
------Instruction
icstation@hotmail.com
1