Beachwaver S Series User Manual

S-SERIES - DUAL VOLTAGE IRONS
USER GUIDE
OPERATION
ROTATION SPEED
Switch button upward
USER MAINTENANCE
CARING FOR YOUR BEACHWAVER
The Beachwaver is virtually maintenance-free. If surface becomes dirty,
unplug iron and, when it is cool, wipe the exterior with a cloth. If anything
abnormal occurs, contact
Do not attempt to repair iron yourself.
Attempting to repair iron yourself voids warranty.
STOR AGE
WHEN NOT IN USE
Turn off and unplug the curling iron. Allow the iron to cool, and store
out of reach of children in a safe, dry location.
Never wrap the cord around the iron, as this may cause premature wear
of the cord and may lead to cord damage that is not covered under
manufacturer's warranty.
Handle the cord carefully to extend cord life, and avoid jerking, bending
or twisting the cord, especially at the plug connection.
WARR ANT Y
At The Beachwaver Co. we want you to be thrilled with our tools. We want you to look
and feel beautiful. We believe in the quality of our tools and test each iron thoroughly.
We welcome your feedback and, in the event of any problem, we welcome the
opportunity to make it right!
The Beachwaver Co. will replace your styling iron for one year from the date of
purchase if the product is defective in materials or workmanship. In no event shall
The Beachwaver Co. be liable for any special, incidental or consequential damages
for breach of this or any other warranty, express or implied, whatsoever. Any implied
warranties, obligations or liabilities, including but not limited to the implied warranty
of merchantability and fitness for a particular purpose shall be limited to the one-year
duration of this written limited warranty. The warranty does not apply in the following
scenarios: any unauthorized party opened the product in an attempt to fix the product,
normal wear and tear, purchasing from an unauthorized seller, damage caused by
misuse or mishandling, or due to user error. Warranty application is determined in the
sole discretion of The Beachwaver Co.
PLEASE REGISTER YOUR TOOL FOR WARRANTY!
Please contact
on how to register your iron or to make a warranty claim.
TO TURN ON
Press and hold the ON/OFF button for 1 second.
The temperature will illuminate to 350ºF.
TO TURN OFF
Press the power button for three seconds
until all lights have turned off.
TO CHANGE TEMPERATURE
To change between °F and °C, press +/- buttons
simultaneously for 3 seconds.
To change the temperature, press the ON/OFF button until
it beeps and use the +/- buttons to adjust. It is important to
always select the proper heat settings for your hair type.
Fine or damaged hair:
Medium or normal hair:
Thick or coarse hair:
NORMAL
Customerservice@beachwaver.com
customerservice@beachwaver.com
300ºF - 330ºF (150ºC - 160ºC )
330ºF - 370ºF (160ºC - 190ºC )
370ºF - 410ºF (190ºC - 210ºC )
SLOW
Switch button downward
for support.
for information