The machine is provided with a four - core supply cable. Green - yellow wire, connected to machine housing is a protective wire. Other three wires are phase wires. Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300 info@jemaautolifte.dk www.jemaautolifte.dk...
Page 4
Fig. 1. Connections 1- supply coupling, 2- inflating coupling, 3- extra air outlet (to be used by the customer), 4- compressed air lubricator,5- extra electric protective terminal Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300 info@jemaautolifte.dk www.jemaautolifte.dk...
Fig 2 Major machine units 7-worktable, 8-table jaws, 9-column, 10-slide, 11-arm, 12-tyre separator, 13-tyre inflation gun, 14- Fig. 3 View of the back wail 6- Extra protective terminal, 15- supply table Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300 info@jemaautolifte.dk www.jemaautolifte.dk...
Page 6
Press pedal gently to avoid its shifting to bottom position. Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300 info@jemaautolifte.dk www.jemaautolifte.dk...
Page 7
Turning the knob from its initial position to the left locks the slide and arm with foot in operating position. Turning the knob to the left unlocks the slide and throws the arm with foot upwards. Fig. 5. View of working head Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300 info@jemaautolifte.dk www.jemaautolifte.dk...
Rest tyre lever against the support of foot 22 and pull tyre edge on bulb 23 - as in gigs 10 and 11. Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300 info@jemaautolifte.dk www.jemaautolifte.dk...
Page 9
Fig. 7. Foot parts: 22-support, 23-bulb, 24-shoe Fig. 8 Setting working head Fig. 9. Foot in operating position Fig. 10 pulling tyre edge onto shoe Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300 info@jemaautolifte.dk www.jemaautolifte.dk...
Push bottom tyre edge, opposite the foot into wheel rim recess. Put opposite tyre edge on foot slide 24 and push under roller 23 - as shown in fig. 12. Fig.12. Mounting Tyre Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300 info@jemaautolifte.dk www.jemaautolifte.dk...
680. After 4000 h operation (excluding breaks), clean the gear and change oil. 8. WARRANTY Jema Autolifte provide 1 year warranty - All repairs and adjustments are to be made by the Jema Autolifte Machine repairs during warranty period by users own means will result in cancellation of warranty.
Page 12
- Pneumatics This declaration is valid for all products which are produced in accordance with the technical documentation which part of this declaration. Warsaw, 01.05.2004 Signature Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300 info@jemaautolifte.dk www.jemaautolifte.dk...
Page 13
This declaration is valid for all products which are produced in accordance with the technical documentation which part of this declaration. Wiesław Roguski Chairman of Board Signature Warsaw, 01.05.2004 Jema Autolifte A/S Industrihegnet 2 4030 Tune Denmark Tel. (+45) 48180300 info@jemaautolifte.dk www.jemaautolifte.dk...
Need help?
Do you have a question about the Euro DWB-10-E and is the answer not in the manual?
Questions and answers