1. Manuals
  2. Brands
  3. IS5 COMMUNICATIONS Manuals
  4. Network Hardware
  5. MicroRAPTOR iMR350
  6. Quick start manual

IS5 COMMUNICATIONS MicroRAPTOR iMR350 Quick Start Manual

Intelligent cyber secure platform
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
M
RAPTOR
MR350 - Q
S
G
ICRO
I
UICK
TART
UIDE
MicroRAPTOR iMR350 - Quick Start Guide
Intelligent Cyber Secure Platform
iMR350
Version: 1.60-3, Date: Jan 2025
© 2025 iS5 Communications Inc. All rights reserved.
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MicroRAPTOR iMR350 and is the answer not in the manual?

Questions and answers

Related Manuals for IS5 COMMUNICATIONS MicroRAPTOR iMR350

Summary of Contents for IS5 COMMUNICATIONS MicroRAPTOR iMR350

  • Page 1 RAPTOR MR350 - Q ICRO UICK TART UIDE MicroRAPTOR iMR350 - Quick Start Guide Intelligent Cyber Secure Platform iMR350 Version: 1.60-3, Date: Jan 2025 © 2025 iS5 Communications Inc. All rights reserved.

  • Page 2: Copyright Notice

    There may occasionally be uninten- tional errors on this publication. iS5 reserves the right to revise the contents of this publication without notice. Contact Information iS5 Communications Inc. 5895 Ambler Dr., Mississauga, Ontario, L4W 5B7 Tel: 1+ 905-670-0004 Website: http://www.is5com.com/ Technical Support: E-mail: support@is5com.com...

  • Page 3: End User License Agreement (Eula)

    (EULA) ICENSE GREEMENT End User License Agreement (EULA) TERMS AND CONDITIONS FOR SOFTWARE PROGRAMS AND EMBEDDED SOFTWARE IN PRODUCTS EULA All products which consist of or include software (including operating software for hardware sup- plied by Supplier and software in object code format that is embedded in any hardware) and/or any documentation shall be subject to the End User License Agreement (“EULA”) attached hereto as Ex- hibit A.
  • Page 4 (EULA) ICENSE GREEMENT quent appeal. If a Patent Claim is made or appears likely, Buyer agrees to permit Supplier to procure for Buyer the right to continue using the affected product, or to replace or modify the product with one that is at least functionally equivalent. If Supplier determines that none of those alternatives is reasonably available, then Buyer will return the product and Supplier will refund Buyer’s remaining net book value of the product calculated according to generally accepted accounting principles.
  • Page 5 Buyer’s knowledge, any of its agents or representatives. Exhibit A: End User License Agreement IMPORTANT – READ CAREFULLY: iS5 Communications Inc. (“iS5Com”) licenses the iS5Com Materials (as defined below) subject to the terms and conditions of this end user license agreement (the “EULA”). BY SELECTING “ACCEPT”...
  • Page 6 A: E XHIBIT ICENSE GREEMENT (EULA) ICENSE GREEMENT – “iS5Com Software” means Software supplied by or on behalf of iS5Com under the Contract. For greater certainty, iS5Com Software shall include all operating Software for iS5Com Hard- ware, and iS5Com Firmware. –...
  • Page 7 A: E XHIBIT ICENSE GREEMENT (EULA) ICENSE GREEMENT Except as otherwise provided in Section 2.1 above, the Customer shall not: (a) copy iS5Com Materials for any purpose, except for the sole purpose of making an archival or back-up copy; (b) modify, translate or adapt the iS5Com Materials, or create derivative works based upon all or part of such iS5Com Materials;...
  • Page 8 A: E XHIBIT ICENSE GREEMENT (EULA) ICENSE GREEMENT CONFIDENTIALITY 4.1 Confidentiality – The Customer acknowledges that iS5Com Materials contain Confidential Information of iS5Com and that disclosure of such Confidential Information to any third party could cause great loss to iS5Com. The Customer agrees to limit access to iS5Com Materials to those em- ployees or officers of the Customer who require access to use iS5Com Materials as permitted by the Contract and this EULA and shall ensure that such employees or officers keep the Con- fidential Information confidential and do not use it otherwise than in accordance with the Con-...
  • Page 9 A: E XHIBIT ICENSE GREEMENT (EULA) ICENSE GREEMENT FREE; AND (B) THE IS5COM MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OR CONDITION OF ANY KIND. 5.2 Limitation of Liability – EXCEPT AS EXPRESSLY PROVIDED IN THE CONTRACT, IN NO EVENT SHALL IS5COM BE LIABLE TO THE CUSTOMER OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, SPECIAL OR CONSE- QUENTIAL DAMAGES ARISING UNDER OR IN CONNECTION WITH THIS EULA EVEN IF ADVISE OF THE POSSIBILITY THEREOF.
  • Page 10 A: E XHIBIT ICENSE GREEMENT (EULA) ICENSE GREEMENT iS5Com. The division of this EULA into sections and the insertion of headings are for conve- nience of reference only and shall not affect the construction or interpretation of this EULA. References herein to Sections are to sections of this Agreement. Where the word “include”, “includes”...
  • Page 11 SUPPORT iSUPPORT Support can be directed to iS5Com’s Technical Action Center at https://is5com.com/isupport/ . You can also call Tech Support: +1 844-475-8324 Service Level Agreements can be tailored to suit your needs with our standard Service Level Agreement packages or through customized solutions. Return Manufacturing Authorization is easy and simplified for our customers.

  • Page 12: Table Of Contents

    Contents Chapter: 1 Introduction ....... . . 1 Purpose and Scope ......1 Chapter: 2 Supported Upgrade Paths .
  • Page 13 Chapter: 15 Web Interface: IP Address and Default Routes ... . . 36 Chapter: 16 Web Interface: User Password ..... . 39 Chapter: 17 Web Interface: Save and Restore Configurations .

  • Page 14: Chapter: 1 Introduction

    URPOSE AND COPE HAPTER NTRODUCTION 1. Introduction The Quick Start Guide provides instruction for first time users on how to login to the MicroRAPTOR through the WebUI, Console or SSH interfaces, how to backup and restore configurations, and how to upgrade the device.

  • Page 15: Chapter: 2 Supported Upgrade Paths

    HAPTER UPPORTED PGRADE ATHS 2. Supported Upgrade Paths This section documents the supported upgrade paths on the MicroRAPTOR The MicroRAPTOR supports the following upgrade paths. If the release that your device is running is not listed on the table below, it is recommended that the iS5 support team is contacted for more detailed instructions.
  • Page 16 HAPTER UPPORTED PGRADE ATHS Table 1: Upgrade Paths (Continued) (Sheet 2 of 2) Model Initial Release Target Release iMR350 1.18.05 1.50 / 11.19.14 iMR350 1.18.05 1.60 / 1.20.11 iMR350 1.19.14 1.60 / 1.20.11...

  • Page 17: Chapter: 3 Console Port: Logging Into The Microraptor

    RAPTOR HAPTER ONSOLE OGGING INTO THE ICRO 3. Console Port: Logging into the MicroRAPTOR The following sections describe how the serial console interface on the MicroRAPTOR is used to configure an IP Address, save a configuration, and upgrade the firmware. On a laptop, install a terminal emulator.
  • Page 18 RAPTOR HAPTER ONSOLE OGGING INTO THE ICRO : Console Ports on MicroRAPTOR NOTE Form a serial connection from your computer to the console port of the MicroRAPTOR, by attaching the console port to the USB port of your laptop or PC and the RJ45 termination to the console port on the MicroRAPTOR.
  • Page 19 RAPTOR HAPTER ONSOLE OGGING INTO THE ICRO Navigate to Ports to determine which COM number the serial connection is using. You may have to unplug and reinsert the USB connection on your PC to make a determination of which COM number has been assigned to your serial connection. When the Ports leaf is expanded it will appear similar to the image below.

  • Page 20: Parity: None

    RAPTOR HAPTER ONSOLE OGGING INTO THE ICRO • Parity: none • Stop: 1 • Flow Control: none You should confirm in Putty’s user interface that it has been configured with the appropriate Baud rate, Data, Parity, stop and flow control values. The following image provides an image of the port and baud rate being set.
  • Page 21 RAPTOR HAPTER ONSOLE OGGING INTO THE ICRO Click Open to launch a terminal. A blank terminal window will appear. ESULT Press Enter. The login prompt will appear in the terminal window. ESULT % Incorrect Login/Password iMR350 Login: To access the command line interface CLI shell, at the MicroRAPTOR login prompt, use the user name admin and password admin.
  • Page 22 RAPTOR HAPTER ONSOLE OGGING INTO THE ICRO Enter the new password. You will be prompted to confirm the new password. ESULT Re-enter new password: 10. Re-enter the new password. The console prompt will appear. ESULT iS5Comm# ESULT You have logged into the MicroRAPTOR via the console port.

  • Page 23: Chapter: 4 Ssh: Logging Into The Microraptor

    SSH: L RAPTOR HAPTER OGGING INTO THE ICRO 4. SSH: Logging into the MicroRAPTOR This section describes how an SSH session can be established between a laptop and the MicroRAPTOR. ONTEXT MicroRAPTOR can be configured through an Interface from a terminal emulator such as Putty. The command line interface allows the user to control various parameters at the system and protocol level.
  • Page 24 SSH: L RAPTOR HAPTER OGGING INTO THE ICRO Open Putty, select the connection type of SSH, and provide the default IP address of the MicroRAPTOR of 192.168.10.1. Then, click Open. The following image is an example of the Putty configuration screen. OR EXAMPLE A login prompt will appear on a terminal screen after Open is pressed.
  • Page 25 SSH: L RAPTOR HAPTER OGGING INTO THE ICRO To access the command line interface CLI shell, at the iS5 login prompt, use the user name admin and password admin. If this is the first login to the device, you will be prompted to change the password. ESULT % Password must be reset.

  • Page 26: Chapter: 5 Command Line: Switch Name

    HAPTER OMMAND WITCH 5. Command Line: Switch Name This section will document how to configure the MicroRAPTOR’s name. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via the console cable or through SSH. Configure the switch name.

  • Page 27: Chapter: 6 Command Line: Switch Prompt

    HAPTER OMMAND WITCH ROMPT 6. Command Line: Switch Prompt This section will document how to change the command line prompt. REREQUISITE In order to perform the tasks in this section you will have already logged into the MicroRAPTOR via the console cable or through SSH.

  • Page 28: Chapter: 7 Command Line: Ip Address Configuration

    : IP A HAPTER OMMAND DDRESS ONFIGURATION 7. Command Line: IP Address Configuration This section will document the configuration of an IP Address and a default route. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via the console cable or through SSH.

  • Page 29: Chapter: 8 Command Line: Admin Password

    HAPTER OMMAND DMIN ASSWORD 8. Command Line: Admin Password This section will document how to set the administrator password. REREQUISITE In order to perform the tasks in this section you will have already logged into the MicroRAPTOR via the console cable or through SSH. Configure the administrator password.

  • Page 30: Chapter: 9 Command Line: Save And Restore Configuration

    HAPTER OMMAND AVE AND ESTORE ONFIGURATION 9. Command Line: Save and Restore Configuration This section will document how to save and restore the MicroRAPTOR configuration. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via the console cable or through SSH.
  • Page 31 HAPTER OMMAND AVE AND ESTORE ONFIGURATION For the configuration to be applied, the MicroRAPTOR needs to be reloaded. iS5Comm# reload OR EXAMPLE Are you sure you want to reload the device? (Y/N) [N]? ESULT Confirm that you would like to reload the device by typing Y. The MicroRAPTOR will be reloaded.

  • Page 32: Chapter: 10 Command Line: Upgrading The Microraptor Using A Usb

    RAPTOR HAPTER OMMAND PGRADING THE ICRO USING A 10. Command Line: Upgrading the MicroRAPTOR using a USB This section will document how to upgrade the firmware on the MicroRAPTOR. This process takes approximately 5 minutes to execute. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via an SSH connection or through the console port.
  • Page 33 RAPTOR HAPTER OMMAND PGRADING THE ICRO USING A Table 1: Upgrade Paths (Continued) (Sheet 2 of 2) Model Initial Release Target Release iMR350 1.16.09 1.41 / 1.18.05 iMR350 1.17.09 1.41 / 1.18.05 iMR350 1.17.13 1.41 / 1.18.05 iMR350 1.17.09 1.50 / 1.19.14 iMR350 1.17.13 1.50 / 1.19.14...
  • Page 34 RAPTOR HAPTER OMMAND PGRADING THE ICRO USING A Allow the MicroRAPTOR to reboot, the U-Boot menu will appear. Do not interact with it. Do not interact with this menu and the boot process will proceed automatically. ESULT The clock will expire and the upgrade will proceed without user intervention. The upgrade process will terminate at a user prompt.
  • Page 35 RAPTOR HAPTER OMMAND PGRADING THE ICRO USING A CSR: Apr 8 06: 24:48 2021 Restoration successfully completed iMR350 login: ESULT The MicroRAPTOR has been upgraded and users may now login to it.

  • Page 36: Command Line: Upgrading The Microraptor Using Tftp

    RAPTOR TFTP HAPTER OMMAND PGRADING THE ICRO USING 11. Command Line: Upgrading the MicroRAPTOR using TFTP This section will document how to upgrade the firmware on the MicroRAPTOR. This process takes approximately 5 minutes to execute. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via an SSH connection or through the console port.
  • Page 37 RAPTOR TFTP HAPTER OMMAND PGRADING THE ICRO USING Table 1: Upgrade Paths (Continued) (Sheet 2 of 2) Model Initial Release Target Release iMR350 1.15.13 1.17.13 iMR350 1.16.09 1.17.13 iMR350 1.17.09 1.17.13 iMR350 1.16.09 1.41 / 1.18.05 iMR350 1.17.09 1.41 / 1.18.05 iMR350 1.17.13 1.41 / 1.18.05...
  • Page 38 RAPTOR TFTP HAPTER OMMAND PGRADING THE ICRO USING Optionally, you may choose to upgrade the MicroRAPTOR firmware. Copy the upgrade software file to the base directory on your TFTP server. Login to the MicroRAPTOR. Type the following, changing the IP address and filename for your particular needs. iS5Comm# firmware upgrade tftp://192.168.0.7/firmware_upgrade.tgz OR EXAMPLE The upload process will begin and progress will be shown on the terminal.

  • Page 39: Command Line: Upgrading The Microraptor Using Sftp

    RAPTOR SFTP HAPTER OMMAND PGRADING THE ICRO USING 12. Command Line: Upgrading the MicroRAPTOR using SFTP This section will document how to upgrade the firmware on the MicroRAPTOR. This process takes approximately 5 minutes to execute. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via an SSH connection or through the console port.
  • Page 40 RAPTOR SFTP HAPTER OMMAND PGRADING THE ICRO USING Table 1: Upgrade Paths (Continued) (Sheet 2 of 2) Model Initial Release Target Release iMR350 1.15.13 1.17.13 iMR350 1.16.09 1.17.13 iMR350 1.17.09 1.17.13 iMR350 1.16.09 1.41 / 1.18.05 iMR350 1.17.09 1.41 / 1.18.05 iMR350 1.17.13 1.41 / 1.18.05...
  • Page 41 RAPTOR SFTP HAPTER OMMAND PGRADING THE ICRO USING Optionally, you may choose to upgrade the MicroRAPTOR firmware. Copy the upgrade software file to the base directory on your TFTP server. Login to the MicroRAPTOR. Type the following, you will have to change the IP address and filename for your particular needs.: iS5Comm# firmware upgrade sftp://tester:password@192.168.0.7//firm- OR EXAMPLE...

  • Page 42: Chapter: 13 Web Interface: Logging Into The Microraptor

    RAPTOR HAPTER NTERFACE OGGING INTO THE ICRO 13. Web Interface: Logging into the MicroRAPTOR This section describes how to login to the MicroRAPTOR via the Web UI (Web User Interface). REREQUISITE Figure 1: Ethernet / IP Connectivity ONTEXT MicroRAPTOR can be configured through Web User Interface (Web UI) from web browsers.
  • Page 43 RAPTOR HAPTER NTERFACE OGGING INTO THE ICRO Launch a web browser to enter the MicroRAPTOR’s default IP address. The IP address of the MicroRAPTOR’s interface is 192.168.10.1. The https protocol is now the default protocol. https://192.168.0.1 OR EXAMPLE Warnings from the browser about the web site having an invalid certificate may ESULT appear.
  • Page 44 RAPTOR HAPTER NTERFACE OGGING INTO THE ICRO Launch a web browser to enter the MicroRAPTOR’s default IP address. The IP address of the MicroRAPTOR’s interface is 192.168.10.1. Enter https://192.168.10.1 into the browser’s address bar. The Login page appears. ESULT Figure 2: Login Page Enter the User Name “admin”...
  • Page 45 RAPTOR HAPTER NTERFACE OGGING INTO THE ICRO : The new password must meet the following criteria: NOTE Password length should be in the range of 8 - 20 !! characters Password should contain at least 1 lowercase characters !! Password should contain at least 1 uppercase characters !! Password should contain at least 1 numerical characters !! Password should contain at least 1 special characters !! New Password must be different from previous password...

  • Page 46: Chapter: 14 Web Interface: System Settings

    HAPTER NTERFACE YSTEM ETTINGS 14. Web Interface: System Settings This section will document how to configure common MicroRAPTOR system settings. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via the Web UI. Navigate to the System Settings page.
  • Page 47 HAPTER NTERFACE YSTEM ETTINGS Figure 1: System Settings At this point you may change the values of any of the following fields. – Switch Name—enter the name for identifying the device. The default value is MicroRAPTOR- This value range is a string of size 15. Prompt Name—enter the prompt name to be used.
  • Page 48 HAPTER NTERFACE YSTEM ETTINGS – System Location—enter the physical location of this node. This value range is a string of size Click Apply to make your changes effective. As a result, the system settings have been changed.

  • Page 49: Web Interface: Ip Address And Default Routes

    : IP A HAPTER NTERFACE DDRESS AND EFAULT OUTES 15. Web Interface: IP Address and Default Routes This section will explain how to set the IP Address on the MicroRAPTOR and create a default route. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via the Web UI. Speak with your Network Administrator to determine the values of the following parameters: •...
  • Page 50 : IP A HAPTER NTERFACE DDRESS AND EFAULT OUTES – Select—select the VLAN interface for which configuration needs to be modified or deleted. In this case it will be VLAN interface #1. VLAN Interface—enter “1”. – Switch—default. – Admin State—select “UP” from the drop down list. –...
  • Page 51 : IP A HAPTER NTERFACE DDRESS AND EFAULT OUTES Figure 3: IP Route Configuration You will need two routes: one route to your network and a default route to your control center. Once these routes are established, a remote user can configure the switch for proper configuration. You will need to configure VLAN 1 to use the default gateway.

  • Page 52: Web Interface: User Password

    HAPTER NTERFACE ASSWORD 16. Web Interface: User Password This section will explain how to change a users password. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via the Web UI. Navigate to the Users page. In the Home Page, go to System >...

  • Page 53: Web Interface: Save And Restore Configurations

    ONFIGURATION HAPTER NTERFACE AVE AND ESTORE ONFIGURATIONS 17. Web Interface: Save and Restore Configura- tions This section will describe how to save and restore the MicroRAPTOR’s configuration. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via the Web UI. 17.1.
  • Page 54 ONFIGURATION HAPTER NTERFACE AVE AND ESTORE ONFIGURATIONS Figure 2: Save Configuration to USB To save the configuration to USB (see above), perform the following. Navigate to the Save Configuration screen. In the Home page, go to System > Save and Restore > Save OR EXAMPLE Set the fields as follows: Save option—select USB Save.
  • Page 55 ONFIGURATION HAPTER NTERFACE AVE AND ESTORE ONFIGURATIONS To save the configuration to TFTP, perform the following. Navigate to the Save Configuration screen. In the Home page, go to System > Save and Restore > Save OR EXAMPLE Set the fields as follows: OR EXAMPLE Figure 3: Save Configuration to TFTP...
  • Page 56 ONFIGURATION HAPTER NTERFACE AVE AND ESTORE ONFIGURATIONS Figure 4: Save Configuration to SFTP Save option—select Remote Save. • • Save Format—select either MIB OID or Script. Script format is human- readable. • Transfer Mode—select SFTP. SFTP User Name—enter SFTP User Name . •...

  • Page 57: Restore Configuration

    ESTORE ONFIGURATION HAPTER NTERFACE AVE AND ESTORE ONFIGURATIONS 17.2. Restore Configuration To restore a configuration from USB, perform the following: Navigate to the Restore page. Go to System > Save and Restore > Restore. OR EXAMPLE The Startup Configuration Restore Source page appears. ESULT Set the fields as follows: Perform the following.
  • Page 58 ESTORE ONFIGURATION HAPTER NTERFACE AVE AND ESTORE ONFIGURATIONS • Restore option—select Flash Restore. Restore Format—select either MIB OID or Script. Script format is human- readable. • • File Name—default file name where the switch’s configurations are saved is iss.conf. Use the default file name.

  • Page 59: Web Interface: Upgrade The Microraptor Using Usb

    RAPTOR HAPTER NTERFACE PGRADE THE ICRO USING 18. Web Interface: Upgrade the MicroRAPTOR using USB This section will explain how to upgrade the MicroRAPTOR firmware. This process takes approximately 5 minutes to execute. REREQUISITE To perform the tasks in this section, you will have already logged into the MicroRAPTOR via the Web UI. For all upgrades, it is recommended that users back up their current running configuration prior to commencing the upgrade process.
  • Page 60 RAPTOR HAPTER NTERFACE PGRADE THE ICRO USING Table 1: Upgrade Paths (Continued) (Sheet 2 of 2) Model Initial Release Target Release iMR350 1.17.09 1.17.13 iMR350 1.16.09 1.41 / 1.18.05 iMR350 1.17.09 1.41 / 1.18.05 iMR350 1.17.13 1.41 / 1.18.05 iMR350 1.17.09 1.50 / 1.19.14 iMR350...
  • Page 61 RAPTOR HAPTER NTERFACE PGRADE THE ICRO USING Click Apply to upgrade the MicroRAPTOR. A timer will appear providing the elapsed time since the upgrade started. The screen ESULT will appear similar to the following.
  • Page 62 RAPTOR HAPTER NTERFACE PGRADE THE ICRO USING The screen will eventually change to the following. The MicroRAPTOR firmware will be upgraded and reloaded automatically. After about 5 minutes, the device will be ready for users to login. As a result, the MicroRAPTOR upgrade is complete.

  • Page 63: Web Interface: Upgrade The Microraptor Using Tftp

    RAPTOR TFTP HAPTER NTERFACE PGRADE THE ICRO USING 19. Web Interface: Upgrade the MicroRAPTOR using TFTP This section will explain how to upgrade the MicroRAPTOR firmware. This process takes approximately 20 minutes to execute when there is a fast network connection between the TFTP server and the MicroRAPTOR.
  • Page 64 RAPTOR TFTP HAPTER NTERFACE PGRADE THE ICRO USING Table 1: Upgrade Paths (Continued) (Sheet 2 of 2) Model Initial Release Target Release iMR350 1.15.13 1.17.09 iMR350 1.16.09 1.17.09 iMR350 1.15.13 1.17.13 iMR350 1.16.09 1.17.13 iMR350 1.17.09 1.17.13 iMR350 1.16.09 1.41 / 1.18.05 iMR350 1.17.09 1.41 / 1.18.05...
  • Page 65 RAPTOR TFTP HAPTER NTERFACE PGRADE THE ICRO USING To Upgrade a Configuration from TFTP navigate to the Upgrade page. Go to System > System Upgrade OR EXAMPLE The upgrade page appears: ESULT...
  • Page 66 RAPTOR TFTP HAPTER NTERFACE PGRADE THE ICRO USING Figure 1: System Upgrade Set the fields as follows: – Upgrade From field—select TFTP. – File Name—enter the file name to be downloaded from the TFTP Server. – Server IP Address—enter the IP address of the TFTP server. ESULT The MicroRAPTOR will be upgraded and reloaded automatically.
  • Page 67 RAPTOR TFTP HAPTER NTERFACE PGRADE THE ICRO USING Click Apply to upgrade the MicroRAPTOR. A timer will appear providing the elapsed time since the upgrade started. The screen ESULT will appear similar to the following: The screen will eventually change to the following:...
  • Page 68 RAPTOR TFTP HAPTER NTERFACE PGRADE THE ICRO USING...

  • Page 69: Web Interface: Upgrade The Microraptor Using Sftp

    RAPTOR SFTP HAPTER NTERFACE PGRADE THE ICRO USING 20. Web Interface: Upgrade the MicroRAPTOR using SFTP This section will explain how to upgrade the MicroRAPTOR firmware. This process takes approximately 20 minutes to execute when there is a fast network connection between the TFTP server and the MicroRAPTOR.
  • Page 70 RAPTOR SFTP HAPTER NTERFACE PGRADE THE ICRO USING Table 1: Upgrade Paths (Continued) (Sheet 2 of 2) Model Initial Release Target Release iMR350 1.15.13 1.17.09 iMR350 1.16.09 1.17.09 iMR350 1.15.13 1.17.13 iMR350 1.16.09 1.17.13 iMR350 1.17.09 1.17.13 iMR350 1.16.09 1.41 / 1.18.05 iMR350 1.17.09 1.41 / 1.18.05...
  • Page 71 RAPTOR SFTP HAPTER NTERFACE PGRADE THE ICRO USING Figure 1: System Upgrade Set the fields as follows: – Upgrade From field—select SFTP. – File Name—enter the file name to be downloaded from the SFTP Server. – Server IP Address—enter the IP address of the SFTP server. –...
  • Page 72 RAPTOR SFTP HAPTER NTERFACE PGRADE THE ICRO USING Click Apply to upgrade the MicroRAPTOR. A timer will appear providing the elapsed time since the upgrade started. The screen ESULT will appear similar to the following: The screen will eventually change to the following:...
  • Page 73 RAPTOR SFTP HAPTER NTERFACE PGRADE THE ICRO USING The MicroRAPTOR will be upgraded and reloaded automatically. After about 5 minutes the device will be ready for users to login to it. As a result, the MicroRAPTOR upgrade is complete.

  • Page 74: Installation Of W11 Product Key

    W11 P HAPTER NSTALLATION OF RODUCT 21. Installation of W11 Product Key This section will explain how to install the W11 Product Key. REREQUISITE Once the iROC is connected to the Internet, the license will be activated automatically. Connect to Internet. Login to Windows. The login and password are user/user (see below). The Login to Windows page appears as shown below.
  • Page 75 W11 P HAPTER NSTALLATION OF RODUCT Figure 2: Update password screen.
  • Page 76 GLOSSARY ENTRIES Command line interface (CLI) is a text-based interface that is used to operate software and oper- ating systems while allowing the user to respond to visual prompts by typing single commands into the interface and receiving a reply in the same way Internet Protocol (IP).

  • Page 77: Index

    Index Device Manager 6 Logging in CLI 6 Passwords for initial login 8 Passwords for initial login in switch 12 Putty Session Configuration 7 Return Manufacturing Authorization xi Service Level Agreements xi new password criteria 12 Web Interface Home Page 32 IP Route Configuration 38 IPv4 Interface Settings 37 Login Page 31...

Table of Contents