Nivel 841417180493 Installation Instructions

License Plate Holder w/12 voltLight
1
Switch the key to the OFF position
and engage the Parking Brake.
2
Note: This License Plate Holder is
designed to function on 12 volts
ONLY.
The Black wire is
the White wire is Negative (-)
3
Using the supplied self tapping
screws, attach License Plate Holder
to your desired location as shown.
Use caution when
mounting location to avoid pinching
wires on back side.
Attach the wires to your 12v switched
power source.
installation instructions
Positive (+) and
Negative (-)
selecting
(-)
(+)
a
Mounting Holes