Sabrent HB-UMP3 User Manual

HB-UMP3 - User Manual
Sabrent USB Type A to 4-Port USB 3.0 Hub
with Individual Power Switches and LEDs
Connect the power adapter to the hub, then to a power outlet
Connect USB Type A Hub with Computer
Press square button directly above USB port to turn on
( Blue LED light will illuminate when powered on. )
At this point, the USB 3.0 Hub is completely installed - no software drivers are needed
to complete the installation.
Thank you for choosing Sabrent and enjoy!
For installation issues please contact:
Support@Sabrent.com