PHALANX PRT0012 Manual

12 volt rotary tool

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

12 VOLT ROTARY TOOL

Model: PRT0012

Read all instructions and product labels.

When using electrical tools, follow all precautions to reduce

the risk of ﬁre, electric shock, and other personal injury.

Table of Contents

Need help?

Do you have a question about the PRT0012 and is the answer not in the manual?

Questions and answers

Summary of Contents for PHALANX PRT0012

Page 1 12 VOLT ROTARY TOOL Model: PRT0012 Read all instructions and product labels. Read all instructions and product labels. When using electrical tools, follow all precautions to reduce When using electrical tools, follow all precautions to reduce the risk of ﬁre, electric shock, and other personal injury.
Page 2: Table Of Contents
MANUAL OF INSTRUCTIONES Contents Page ............. General Power Tool Safety Warnings ................Rotary Tool Safety Warnings ........................Symbols ........................Features ......................... Assembly ......................Operation 8-12 ......................Maintenance ....................... Illustrations 14-15 ................Parts Ordering and Service Back WARNING: READ INSTRUCTIONS MANUAL BEFORE USING PRODUCT.
Page 3: General Power Tool Safety Warnings
GENERAL POWER TOOL SAFETY WARNINGS PERSONAL SAFETY WARNING: KEEP CHILDREN AWAY. Do not let children and Read all safety warnings, instructions, illustrations visitors contact tool or extension cord. All children and and specifications provided with this power tool. visitors should be kept away from work area. Failure to follow all instructions listed below may result STORE IDLE TOOLS.
Page 4 GENERAL POWER TOOL SAFETY WARNINGS POWER TOOL USE AND CARE CHECK DAMAGED PARTS. Before further use of the Keep handles dry, clean, and free from oil and grease. tool, a guard or other part that is damaged should be DISCONNECT TOOLS. Unplug the tool when not in carefully checked to determine that it will operate use, when moving tool from place to place, before properly and perform its intended function.
Page 5: Rotary Tool Safety Warnings
ROTARY TOOL SAFETY WARNINGS SAFETY WARNINGS COMMON FOR Hold power tool by insulated gripping surfaces, because the cutter may contact its own cord. Cutting GRINDING, SANDING, WIRE BRUSHING, a” live” wire may make exposed metal parts of the POLISHING, CARVING OR ABRASIVE power tool”...
Page 6 ROTARY TOOL SAFETY WARNINGS Wear protective gloves and face shield with wire or SAFETY WARNINGS SPECIFIC FOR bristle brushes. Apply wire or bristle brushes lightly GRINDING AND ABRASIVE CUTTING-OFF to the work as only the tips of the wire/bristles do OPERATIONS: the work.
Page 7: Additional Safety Rules
ROTARY TOOL SAFETY WARNINGS SAFETY WARNINGS SPECIFIC FOR WIRE properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, BRUSHING OPERATIONS: breakage of parts, mounting, and any other conditions Be aware that wire bristles are thrown by the brush that may affect its operation.
Page 8: Symbols
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates a hazardous situation, which, if not avoided, will result in death or DANGER: serious injury. Indicates a hazardous situation, which, if not avoided, could result in death or WARNING: serious injury.
Page 9: Features
FEATURES PRODUCT SPECIFICATIONS Quick-Change Collet................................Universal Rated Speed ..............................5,000-32,000/min (RPM) ASSEMBLY WARNING: WARNING: Do not use this product if it is not completely assembled Do not attempt to modify this product or create or if any parts appear to be missing or damaged. Use of accessories or attachments not recommended for use a product that is not properly and completely assembled with this product.
Page 10: Overload Protection
OPERATION OPERATION OF THE SWITCH QUICK-CHANGE COLLET Before inserting the battery compartment into the tool, be NOTE: The tool ships with a preinstalled collet that is sure to check that the switch can be in the O off position machined to precision tolerances to fit accessories with and move the switch to the "I"...
Page 11 OPERATION BALANCING ACCESSORIES To remove: Turn off the rotary tool. For precision work, it is important that all accessories be properly balanced. To balance an accessory, slightly loosen Loosen the collet sleeve. the quick-change collet and give the accessory a 1/4 in. turn. Remove the accessory.
Page 12 OPERATION Follow the instructions in the PHALANX attachment Use the indicator mark above the speed control dial to set the head operator’s manual to install the attachment head. best speed for the job. The speed control dial is numbered 1 to 6: To remove an attachment head: Turn off the rotary tool.
Page 13 OPERATION Hardwoods and glass require high speed operation. Drilling Practice on scrap materials first to see how the tool should also be done at high speeds. operates. Keep in mind that the work is done by the speed of the tool and by the accessory in the collet. You should To determine the optimum operational speed for different not lean on or push the tool into the work.
Page 14: Maintenance
MAINTENANCE BATTERY PACK DISPOSAL WARNING: This product contains lithium-ion batteries. Local, state or When servicing, use only identical replacement parts. federal laws may prohibit disposal of lithium-ion batteries Use of any other parts could create a hazard or cause in ordinary trash. product damage.
Page 15: Illustrations
PRT0012 Fig. 1 A - Quick-change collet B - Shaft C - Spindle lock button D - Threaded end E - Loosen F - Tighten Fig. 2 A - Quick-change collet B - Spindle lock button C - On/off switch...
Page 16 Fig. 3 Fig. 5 A - On/off switch B - Speed control dial C - To increase speed D - To decrease speed Fig. 6 A - Screw) B - Accessory C - Washer D - Standard mandrel E - Screw mandrel F - Sanding drum G - Drum mandrel Fig.
Page 17 Customer Service Email: service@phalanxtools.com Model: PRT0012 Tel:(+1)8772199866...

This manual is also suitable for:

P03Pra420