Design Toscano SS-11155 Instructions

INSTRUCTIONS
PRODUCT
OR
YOUR
Step 1
Put pump
into reservoir.
Step 5
Fill the reservoir with
water and take a note
of the level that the
water reaches for
future reference
when topping off.
©Copyright 2017, Design Toscano, Inc.
1 . 8 0 0 . 5 2 5 . 0 7 3 3
DESIGNTOSCANO.COM
Step 4
Fix the barrel on
the fountain body.
Step 2
Connect the flexible
hose to the pump.
Step 6
Plug in and switch on.
After a short while the
water will start to flow.
Add water as needed.
Cistern Well Pump Barrel Garden Fountain
Thank you for your recent purchase
of this Design Toscano hand crafted
garden fountain. We have taken great
care to create this piece especially for
you. Please review these instructions
and assemble this piece with care.
Step 3
Fix the decorative
pump on the
fountain body.
Adjust the pump flow rate to achieve the desired
effect and to minimize any splashing. Splashing
can occur if the flow rate is too high or the
feature water level is too full. The flow rate can
be increased or decreased by moving the flow
rate control slider on the pump body. Moving the
switch towards (+) will increase the flow rate and
moving it towards (-) will decrease it.
WARNING
Never turn on the pump before the fountain
is full of water. Also do not let the water level
fall below the top of the pump as the pump will
become damaged if ran without water. Fountain
should be placed on a level surface.
T H A N K YOU
P U R C H A S E
SS-11155