HydroCheck WaterWatcher Manual

WaterWatcher Leak Detector
Overview:
The WaterWatcher is designed to detect water leaks. When a leak is detected, the
WaterWatcher will sound an alarm and turn off the appliance that is causing the leak by
de-energizing its output. The LED indicator on the front of the control module is green
when the output is energized and red when it is de-energized. Once the WaterWatcher is
triggered, it will stay triggered until it is reset using the Smart Button.
Step-by-Step Installation:
Step 1:
Plug the WaterWatcher control module into a 120 VAC outlet.
Step 2: Plug the appliance into the WaterWatcher control module.
Step 3:
Place sensor in optimal location to detect potential sources of leaks. Sensor
should be placed with probes facing down and label side up.
Product Specifications:
Power:
Output Rating:
Alarm Rating:
Cable Length:
Function:
Smart Button Features
Mute Alarm
Switch Reset
Warranty:
STAK Enterprises Inc. warrants the WaterWatcher to be free from defects in materials and
workmanship under normal use and service for a period of five years from the date of purchase. STAK
Enterprises Inc. makes no other express or implied warranty for this device. No agent, representative,
dealer, or employee of STAK Enterprises Inc. has the authority to increase or alter the obligations or
limitations of the warranty. The company's obligation of this warranty shall be limited to the repair or
replacement of any part of the WaterWatcher which is found to be defective in materials or
workmanship under normal use and service during the five year period commencing with the date of
purchase. During the initial 90-day period commencing with the date of purchase, such repair or
replacement shall be made without charge. During the remaining period of the warranty, such repair or
replacement shall be made at a charge to the customer not to exceed the manufacturer's cost.
THE DURATION OF ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSES, SHALL BE LIMITED TO
THE PERIOD OF ONE YEAR COMMENCING WITH THE DATE OF PURCHASE. IN NO CASE
SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR
BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also
have other rights that vary from state to state.
www.hydrocheckproducts.com | 1(877)-225-2124
120 VAC, 60 Hz
120 VAC, 13.8 Amp, 3/4 HP
80 dB
12ft
Output is de-energized in
alarm condition
Press and release the Smart Button while the alarm is active. The
alarm will remain muted until the switch has been reset.
Press and release the Smart Button when the sensor is dry.