Fluance VB52 Quick Start Manual

RECORD CARBON FIBER BRUSH
1. With the record spinning, place the brush on record perpendicular
to the record grooves
2. Gently hold on record for 2-3 rotations
3. Drag brush across and off the record at a 45° angle
4. Use brush cleaner built into handle to remove dirt and debris from
the brush
RECORD VELVET BRUSH
1. With the record on a flat surface, place brush on record perpendicular to the record grooves
2. Gently drag brush around record 2-3 times
3. Drag brush off record at a 45° angle to remove dust
STYLUS BRUSH
1. Ensure tonearm is secure
2. Position stylus brush under stylus tip and gently drag the brush from back of stylus tip to the
front of the stylus
3. Be careful to only go in one direction and to fully remove brush before repeating
4. Repeat 2-3 times or until all debris is removed from the stylus
Handle
Carbon
Fiber Brush
Velvet Brush
Stand
Quick Start Guide
VB52
Stylus Brush