Advertisement
Quick Links
Before conversion, please ensure all necessary parts and tools are present. Ensure all
burner control knobs are in the "OFF" position, the pipe valve is closed, and the pipe is
disconnected from the regulator and removed from the cooker top. Unplug any electrical
connections.
And then check what kind of gas you use. NG (Natural Gas) or LPG (Liquefied Petroleum Gas)?
For NG (Natural Gas)
NOTE: The original gas nozzles are for NG, so you don't need to change the orifices.
Step 1: Put the right burner caps onto the burner bases.
Step 2: Connect the gas tank's pipe with the
regulator.
Then open the valve on the pipe, ignite all the
burners and then see if the flame looks normal works on the maximum flame position or not. If not, then
turn off all the control knob. Wait until the burner cool down, and then re-assembly the jet by seals.
For LPG (Liquefied Petroleum Gas)
Step
1:Take off the burner caps from the burner and then replace the orifice to LPG
nozzle. Please refer to page 11 of the instruction for the details orifice sizes of each burner.
Advertisement
Summary of Contents for Maharlika 768443067928
- Page 1 Before conversion, please ensure all necessary parts and tools are present. Ensure all burner control knobs are in the “OFF” position, the pipe valve is closed, and the pipe is disconnected from the regulator and removed from the cooker top. Unplug any electrical connections.
- Page 2 Step 2: Put the right burner caps onto the burner bases. Step 3: Screw out the blue pins at both ends of the regulator. Step 4: According to the direction of the arrow to determine the left of the regulator to connect the gas tank, the right to connect the stove.Then connect the brass connector to the left side of the regulator.
Need help?
Do you have a question about the 768443067928 and is the answer not in the manual?
Questions and answers