A ALPS B0CLNNFPZQ Instruction Manual

INSTRUCTION MANUAL
A. CONTROL OF WATCHES
Button A- EL light
Button B - Mode
Button C - Reset
Button D- Star/Stop
1.1 Normal Time Display shows Hour, Minute, Second, Day of week, Date and Month
1.2 Press Button B once: Chronograph mode
1.3 Press Button B twice: Alarm mode
1. 4 Press Button B three times; Time Setting mode.
1.5 Press Button B four times: Nomal Time Display mode.
1.6 Press Button A to activate EL light at any mode. The light goes out automatially after 3 seconds.
1.7 In any setting mode, press and hold Button D to activate the"Rapid Increase" setting function.
B. NORMAL TIME SETTING MODE
2.1 in Nomal Time Mode, press Button B three timnes to enter Normal Time Seting mode with second digit fashes
2.2 Press Button D to reset seoond to zero
2.3 Press Button C to shift to next unit
2.4 Press Button D for adjustment, press & hold this button to increase the speed for adjustment
2.5 Repeat 2.3 & 2.4 the unit selection is in the following sequence: Second-Hour-Minute-Month-Date-Day of Week
2.6 Press Button B to complete the setting and return to Normal Time Display Mode
2.7 During adusting Hour, the letter shows on window represent 12/24 hour fomat: "A" - AM, 'P - PM,"H" - 24 hour
format.
Format will be interchanged for every 24 hour cycle.
C. CHRONOGRAPH MODE
3.1 In Normal Time Display mode, press Button B once to enter Chronograph mode.
3.2 Press Button D to start counting & Button D to stop again, press Bution C to reset zero
3.3 Cumulatve Split Timing - During counting, press Button C to show the first counted time. The counting stops on
display but
time, press Button D and then Button C. Press Button C again to reset zero
3.4 Press Button B return to Normal Time Display Mode
It is stll processing. To show the second counted
D. ALARM TIME MODE
4.1 In Nomal Time Mode, press Button B twice to enter Alarm mode
4.2 Press Button D to adjust the Hour and press Button C to shit to Minute, and press Button D again to adjust
4.3.Press Button B to save the Alarm Time and return to Normal Time Display mode
4.4 Alarm is automatically activate once you adjust the Alarm time, a "ALM" symbol is on
4.5 Press Button C once to activate Hourly Chimes, a" SIG symbol is on
4.6 Press Button C twice to activate both Alarm and Hourly Chimes, both"ALM" and "SIG" symbol are on
4.7 Press Button C three times to deactivate both Alarm and Hourty Chime
4.8 When the alarm Chimes press Button D to turm off the Chime
E. BATTERY REPLACEMENT
When the read out is dim or no longer display, it is time to replace the battery with a CR2025 or equivalent.