Advertisement
Advertisement
Table of Contents
Related Manuals for Foiresoft Motor Basic-17-W 20 x H 32
Summary of Contents for Foiresoft Motor Basic-17-W 20 x H 32
- Page 1 MOTORIZED ZEBRA ROLLER BLINDS...
- Page 2 �� PRODUCT WARRANTY �� GETTING STARTED �� PARTS NAME, PARTS DIMENSIONS �� HOW TO INSTALL �� THINGS TO KNOW BEFORE USE �� PRECAUSTIONS FOR USING �� REPLACING ROLLER FABRIC & HEADER �� GUIDANCE ON THE TOP AND BOTTOM GAP �� ��...
-
Page 3: Product Warranty
PRODUCT Foiresoft provide a limited warranty service for 6 months after the date of purchase. Not only blinds but also the motor WARRANTY and remote controller. The support we provide under the limited warranty is only available for manufacturing defects (i.e, material defects, workmanship that cause product... -
Page 4: Getting Started
GETTING STARTED INCLUDED COMPONENTS L- bracket x 2 EA C-clamp x 2 EA Dry anchor & screw x 2 EA Screw x 3 EA ★ The amount of included components might differ depending on the size of the shades. Blind Shade Remote controller X 1 EA Charging cable X 1 EA ★... -
Page 5: Parts Name
PARTS NAME � � � � � � Motor LED Light �� Chargeing Port H Button Antenna � �. Side Cover �. End Plug �. Roller Tube �. Top Header �. Motor � � �. Shade Fabric �. �� Bottom Rail End Cap �... -
Page 6: How To Install
HOW TO INSTALL INSTALLING TIPS Make sure the blinds are fully rolled up to ease the installation. Confirm the direction of the header's front side and back side before installing. Check the space for check if the surface is flat to ensure that the blinds will be able to be installed beautifully. - Page 7 HOW TO INSTALL CEILING MOUNT Preparation Measure the location and You may need to use the You may need an electric mark. drywall anchors before drill to make a hols securing the C-clamps or depending on the surface L-brackets. material. Ceiling Mount Secure the C-clamp using the screws included in the package.
- Page 8 HOW TO INSTALL WALL MOUNT Wall Mount Secure the L-braket using the screws included in the package Engage the C-clamp Turn the C-clamps 90°. with the L-bracket. (Check the direction of the C-clamp.) Insert the shade into the C-clamps.
- Page 9 THINGS TO KNOW BEFORE USE Paring Motor with Contorller If buying one blind, the remote is pre-connected and ready for use upon delivery. For two or more blinds, will be shipped in unpairing condition; Please connect them manually upon receipt. How to pair the remote control with blinds? H button Inside of Header...
- Page 10 PRECAUTIONS FOR USING ADJUSTING THE FABRIC Before the first use, lower the blinds all the way down and locate the blinds' fabric to the center. Install blinds first. Lowering the blinds all the way down first. Please hold the antenna gently, ensuring it does not come into contact with the fabric.
- Page 11 REPLACING ROLLER FABRIC NOTE 1. During the replacement process, make sure the antenna does not get entangled inside of header. 2. In the case of replacing the Top Header, not the fabric, please open both side covers and slide the fabric onto the new header.
- Page 12 INFORMATION FOR TOP AND BOTTOM GAP HEAEDR about about 0.4 inch 0.5 inch Due to working mechanism, there's a size gap between the fabric and the header. The total size gap will be around 1 inch and the fabric usually will be off centered because the motor device parts are all on the right side.
- Page 13 NOTE ★ We recommend to read all instructions carefully before starting use the Motorized blind. ★ Please refrain from any operations other than the recommended usage. Motor Can I control the blinds with the remote control while the motor is charging? It is not recommended to use it during charging.
-
Page 14: Other References
CLEANING GUIDES �� DO NOT WASH �� DO NOT USE CHEMICAL �� DO NOT IRON How to remove stain Use soft brush to remove dust. Please do not use any wet equipment to clean the shade. Do not dry the fabric in direct sunlight. Recommended Installatoin Location For Indoor Home, Office, Café, Restaurant, etc.,...
Need help?
Do you have a question about the Motor Basic-17-W 20 x H 32 and is the answer not in the manual?
Questions and answers