HXW 192480000226 Installation Manual

1.Spread the tripod to an ideal width,
then tighten the thumb screw ① to
fix it.
4.Fix it by tightening screw ③ and nut
⑤.
2.Loose the thumb screw ③ and nut
⑤ on the throne bottom a bit.
5.Loose the thumb screw ② a bit,
then you can rotate throne
counterclockwise to adjust it into
a higher height.
3.Install this throne on the rack.
6.While you get an ideal height, please
tighten screw ② and nut ④ with a
drum key to fix it.