Fiskars 770210-1001 Instructions

Blade change instructions
Snap-off Utility Knife
CAUTION: For your protection, wear gloves, as well as
ANSI-approved safety glasses during this operation.
A
B
1. Turn wheel counter
clockwise until it stops
(A), then push the blade
lock up (B).
4. Push new blade in until
it clicks.
2. Push the blade slider
out and make sure the
blade is fully extended.
5. Retract the blade fully.
3. Pull the blade out from
the front of the knife.
6. Push the lock down into
the locked position.