Advertisement
Quick Links
Disassemble Hanging Bar
Step1. Pull out the clip from the hole
Step2. Lift up the bar
Step3. Detach from one end
Step1. Insert from one end
Step2. Insert from the other end
(#1)
(#4)
Step4. Detach from other end
Step5. Remove the clip
(#3)
1
2
2
1
1+ 1
1
1
1
1
support@dripex.co.uk
Advertisement
Summary of Contents for Dripex square1#2023
- Page 1 Step1. Pull out the clip from the hole Step2. Lift up the bar Step4. Detach from other end Step5. Remove the clip Step3. Detach from one end Step1. Insert from one end Step2. Insert from the other end 1+ 1 (#1) (#3) (#4) support@dripex.co.uk...
- Page 2 Place the cabinet vertically, then screw the center caster onto the bottom drawer ① ④ screw inside the bottom drawer ⑤ ② Lay on its side, screw the 4 corner casters onto the bottom ③ ⑥ Pull out the bottom drawer, insert the center caster...
Need help?
Do you have a question about the square1#2023 and is the answer not in the manual?
Questions and answers