ATUVOS AT2101 Disassembly

Disassembly & Replacement of Battery Instruction
1
Use your fingernails or insert a smaller tool
into the small gap at this postion.
(Note: The panel with logo is facing down.)
3
Then slide the other side along the gap
to the edge.
5
Use a paperclip to remove battery and
then replace a new one, placing the
battery positive side up.
ATUVOS TAG
Take out
Renewed
2
Slide left along the gap to the edge.
4
Pull up and open the battery cover in
the back of the ATUVOS TAG.
6
Close the battery cover by aligning the
top hole on both lids.