Longwei Electric K3010D Black US Manual

If you find that the power supply cannot be set below 5V, please help to adjust it according to
the following operation, thank you.
1. Stop working and Power off , firstly Open the power supply .
2. Pull out the plug, The connectors of A and C are reversed. Use a similar tool to pry the
connector out, original the position is ABC ,but correct is CBA.
3. when finish it , Please connect the wire back,
then power ON, try it again you can use it below 5V.
At the end , In order to make it easier for you to understand this operation, we would like to
share the video on YouTube. Address at below :
https://www.youtube.com/watch?v=jpvXrKTrmJg
A
B
C