Perky-Pet Squirrel-Be-Gone 336 Instructions

Filling Instructions:
1. Press down on outer cage and lift up the lid.
2. Fill with seed.
3. Slide lid back over seed tube.
Disassembly and cleaning instructions:
1. Remove lid.
2. Clean with a mild soap and water solution.
To Adjust Spring Action:
To increase weight required to activate system, simply hook
the spring wire into one of the lower holes.
IMPORTANT: To properly function, all springs should be
adjusted to the same setting.
TIP: Adjust the springs in single increments each time-until
you see no squirrels feeding.
855-757-5973 | Woodstream Corporation | 69 N. Locust Street Lititz, PA 17543, USA
Squirrel-Be-Gone
Model #336
®
See our full line of Perky-Pet
®
birdfeeders and accessories at www.perkypet.com
Lighter
Heavier