Dritz 699 User Instructions

User Instructions:
TO ASSEMBLE HEM MARKER:
1. Pull down on legs until tops are flush with base. Then swing legs up to lock flared ends into
slots.
2. Remove chalk container from spray nozzle and fill with chalk. Push container back into
nozzle.
3. Attach spray nozzle onto small peg on slider.
TO MARK HEMS:
1. Try on garment. If garment is cut on the bias, let it hang for 24 hours before marking.
2. Wear shoes and stand on a hard surface.
3. Line up top of slider with desired measurement from floor. The markings on the ruler have
been positioned to ensure an accurate measurement from the floor.
4. Stand erect with garment just touching powder dispenser. Squeeze bulb to make a neat chalk
line.
5. Continue around skirt making marks approximately 2 to 3 inches apart.
6. Fold and press hemline at marks.
7. Trim and finish hem edges; stitch by hand or machine.