AGPtek AD2000-M Instructions

I. Technical Specifica ons
1. Major product specifica ons
No.
1
2
3
4
5
Proximity card recogni on frequency
6
7
8
9
10
11
12
13
2. Default product se ngs
Types
Administra on passcode
Unlocking passcode
※ Notes: Adminstra on passcode and Unlocking passcode can be modified based on user needs.
II. Opera onal Procedure
1. How to add a door card
The door card refers to the card for undoing the lock. The maximum number of cards allowed is 1,000. For security, each added card is assigned a
three-digit, unique serial number. The user is advised to remember this serial number. In case the user loses a card, this number can be deleted to prevent
the card from being used by anyone else. （The serial number of the door card cannot be repeated. Otherwise, the system will produce three short beeps,
and the red light will turn green. In this case, you can press 【5】to input other three-digit numbers or press【#】to exit the system）
Press 【 # 】 + 【administra on code】
（The green light will come on and you will hear three short beeps）
※ Note: If 【#】 is not pressed a er the card is sensed, the system will exit within five seconds to complete the entry opera on. If several cards are to be
added co vely, the next card can be sensed within five seconds. The system will add the card and assign a serial number following the previous one.
For example, if the serial number of the first card is 015, then the serial number of the second card will automa cally be set to 016. If 016 has been used, the
system will aut cally skip it and assign to the next available number.
2. How to delete the door card
(1)Delete the card via card sensing
Press 【#】 + 【administra on code】
（The green light will come on and you will hear three short beeps）
(2)Delete the card usingthe serial number (in the case of card loss)
Press 【#】 + 【administra on code】
（The green light will come on and you will hear three short beeps）
3. How to modify the unlocking passcode (ini alized to 1234)
Press 【#】 + 【administra on code】
（The green light will come on and you will hear three short beeps）
4. How to set the unlocking
Press 【#】 + 【administra on code】
（The green light will come on and you will hear three short beeps）
※ Note: TT denotes the unlocking
5. How to modify the administra on passcode
Press 【#】 + 【administra on code】
（The green light will come on and you will hear three short beeps）
Instruc for AD2000-M Door Access Machine
Item
Working power
Unlocking relay
Ambient temperature
Rela ve humidity
Number of cards allowed
Proximity card recogni on
Car reading distance
Electric lock interface
External car reader interface
Ways of opening the door
Unlocking dura on
Tamper alarm
Original se ngs
881122
1234
in seconds. If the unlocking
Specific
DC: 12V±10%/1.2A
Working: 0℃~45℃
Working:40%~90%RH Storage:20%~90%RH
ID type: 125KHz
ID type: EM or EM compa ble cards
ID type: 5~15cm
Output from the relay or the level (op onal)
A Weigand26 interface
Door card or the unlocking passcode
can only be used to access the administra on system
and is useless for undoing the lock.
can only be used to undo the lock.
Press 【 5 】
( The red light will come on )
Press【#】to exit
Press 【7】
( The red light will come on )
Press 【7】
( The red light will come on )
Press 【3】
( The red light will come on )
Press 【2】
( The red light will come on )
is 3 seconds, then TT=03.
Press 【0】
( The red light will come on )
Press【#】to exit
s
DC12V/2A
Storage: -10℃~55℃
1000
3 seconds
Ac vated
Notes
Enter the three-digit serial number
（You will hear two short beeps）
Sense the card（You will hear three
short beeps come on）
Sense the card
(You will hear three short beeps）
Enter the three-digit serial number
（You will hear three short beeps）
Enter the new four-digit passcode
（You will hear two short beeps
and The green light will come on）
TT （You will hear two short beeps
and The green light will come on）
Enter the new 6-digit administra on passcode
（The system will provide no light or sound
indica n）
Enter the new 6-digit administra on passcode
again（The green light will come on and you
will hear three short beeps）
Press 【 # 】
to exit
Press 【 #】
to exit
Press 【 #】
to exit
Press 【 #】
to exit