Advertisement
Quick Links
Will Level Bolt work with my lock?
Level Bolt is designed for most American standard deadbolts and requires
a properly operating door and latch. Visit our interactive compatibility guide or
read through the steps below to make sure you have what you need to
successfully install your lock. To learn more, visit our
Support
page.
level.co/compatibility
1
"
door
thickness
bore hole
2
" or 2
"
backset
American standard deadbolt
Standard size door
Properly aligned door
level.co
1
Advertisement
Related Manuals for Level C-D11U
Summary of Contents for Level C-D11U
- Page 1 Will Level Bolt work with my lock? Level Bolt is designed for most American standard deadbolts and requires a properly operating door and latch. Visit our interactive compatibility guide or read through the steps below to make sure you have what you need to successfully install your lock.
- Page 2 Most Standard and Low Profile residential deadbolts can be replaced with Level Bolt. Tubular locks vary in design and are not standardized. Level Bolt works with Tubular locks that do not share an exterior faceplate. Interlocking and Mortise Locks are not compatible with Level Bolt. Consider adding Level Bolt to a different door.
-
Page 3: Door Alignment
Does the bolt lock and unlock without any friction? Tip: If you need to push or pull on the door so the deadbolt can turn smoothly, your door is misaligned and needs adjusting. level.co... - Page 4 Door Specifications Level Bolt is engineered to fit inside ANSI standard exterior doors. Make sure your door meets this standard by taking 3 simple measurements: REQUIRED MEASUREMENTS: • Door thickness is 1 ¾” thick • Bore hole size is 2 ⅛” in diameter •...
- Page 5 Door Specifications (continued) Level Bolt is engineered to meet ANSI standard strike plate dimensions. The strike plate is located on the door frame and provides additional security for your home. Make sure your strike plate cut-out meets standard dimensions: REQUIRED MEASUREMENTS: •...
-
Page 6: Lock Specifications
Level Bolt is designed to work with most American standard residential deadbolts. The following list of deadbolts is just a highlight of some of the verified makes and models that are compatible with Level Bolt. To find a complete list of compatible deadbolts, visit the URL below. - Page 7 All deadbolts need a properly aligned door to operate smoothly. Door and Strike Plate Specifications ” door thickness Level Bolt is engineered to work with ANSI standard exterior doors and strike bore hole plates. ” or 2 ” backset...
Need help?
Do you have a question about the C-D11U and is the answer not in the manual?
Questions and answers