Advertisement
Quick Links
Power On/Off, Reset, Add, Remove and other
1. When not connected, the power-on sound and reset sound are the same.
2. There is a difference between the power-on sound and the reset sound in
the connected state.
3. There is no prompt sound after removal. The startup sound is the same as
the startup sound in the connected state. Reset is required to connect iPhone
after removal.
4. Shutdown sound: 2 beeps (Sound " DiDi")
Item Find
Status
In Shutdown
Status
(Not connected
to iPhone)
In the power-on
status
(Not connected
to iPhone)
Operations for JDA01
JDA01 Sound and Button Instructions
Button operation
instructions
1. Press the button once:
power-on prompt sound
2. Press the prompt sound
3 to 5 times quickly:
power-on prompt sound
1. Press the button once:
there is no response.
2. Long press: shut down
(2 beeps Sound " DiDi")
3. Press 5 times quickly
and hold the last button
until the prompt sound
appears and then release.
Matters needing attention
The startup and reset sounds
are the same
In the off status, press once and
wait for a while to enter the
power on state. Press 3 to 5
times to hear the power on
sound, which is actually a
response to the power on
sound of the first press.
(No matter how many times you
press it, it will turn on, and the
off status cannot be reset)
because it is already power on
status.
The power on and reset sounds
are the same.
Advertisement
Summary of Contents for JDTDC JDA01
- Page 1 Power On/Off, Reset, Add, Remove and other Operations for JDA01 JDA01 Sound and Button Instructions 1. When not connected, the power-on sound and reset sound are the same. 2. There is a difference between the power-on sound and the reset sound in the connected state.
- Page 2 1. Press the button once: because it is already power on power-on prompt sound status. 2. Long press: shut down (2 beeps Sound " DiDi") 3. After shutting down, press: turn on The power on sound when (the prompt sound is connected with iPhone is different from the different from other sounds...
- Page 3 (if the JDA01 device is powered on). (2) Long sound: Power on or successfully reset the JDA01 device. a. Power on: Short press one time to power on (if the JDA01 device is powered off). b. Reset: Press 5 times in succession and hold the 5th time. If you hear a long sound, the reset is successful.
- Page 4 If you don’t know whether the JDA01 device itself is on or off, short press the button. If there is no sound, it means that the JDA01 device may be on. If there is a sound, it should be a long sound, indicating that it was in the off state before and now on.
- Page 5 16 devices. Once an Apple ID is connected to the JDA01 device, other Apple devices logged in to the Apple ID can see the JDA01 device. One JDA01 device can only be connected to one Apple ID number.
Need help?
Do you have a question about the JDA01 and is the answer not in the manual?
Questions and answers