8BITDO SN30 Instruction Manual

SN30 2.4G and SF30 2.4G
DOWN
+
SELECT
(Reset
button
)
Connection
NES/SNES/SFC Classic Edition (wireless connection)
1. Plug the 2.4G Retro Receiver into your NES / SFC / SNES Classic Edition.
2. Press START on your controller to connect to the Retro Receiver.
3. LED will be solid blue when connection is successful.




• Home Menu Access for NES/SNES/SFC Classic Edition.
SELECT + DOWN = RESET




• If connection is lost or you wish to pair with a new retro receiver, press and hold SELECT on the
controller for 3 seconds. Blue LED will rapidly blink and be solid blue when connection is successful.
Windows/macOS/Android (wired connection)
1.
Connect
the
controller
to
your
Windows/macOS/Android
via
the
USB
cable.
2. LED
will
be
solid
blue
when
connection
is
successful.
X-Input: press and hold START+X for 3 seconds, blue LED blinks twice to indicate mode activation.
D-Input: press and hold START+B for 3 seconds, blue LED blinks twice to indicate mode activation.
macOS: press and hold START+A for 3 seconds, blue LED blinks twice to indicate mode activation.


•


Default mode: D-input.
· Built-in 180 mAh Li-on with 25 Hours of play time.
· Rechargeable via USB cable with 60 minutes charging time.
Sleep mode - 15 minutes with wireless connection but no use.
· Please visit support.8bitdo.com for further information and additional support.
START
(to power on controller)
Power LED in red
Power LED in green
Power LED turns off
SN30 2.4G and SF30 2.4G
DOWN
+
SELECT
(Reset
button
)
设备连
NES/SFC/SNES
Classic （
线连 ）

NES
/
SFC
/
SNES
Classic
⼿柄端⼝， 轻按
START
键 可连 ， 连
⻓ 。
*

连 丢失或重 配 ， 可⻓
SELECT
键
3
进 配 状态,
蓝灯快 闪烁， 连




成功 ， 蓝灯⻓ ⽰配 成功。
Windows/macOS/Android
(有线连 ,
有线 先)
⽤
USB
线 ⼿柄连
Windows/macOS/Android
设备
USB
⼝， 连
3
[START+X]
键:

Xinput
模式,
蓝灯闪两下 ⽰成功。
3秒
[START+B]
键:

Dinput
模式,
蓝灯闪两下 ⽰成功。
3秒
[START+A]
键:

macOS
模式,
蓝灯闪两下 ⽰成功。
*

默认Dinput
模式。
电
电量状态
电量不⾜
电中
电 成
内
180
mAh
锂电池， 可持续使⽤约
25
⼩时, 电时间约
60
钟。
15
分钟⽆操作会⾃动休眠。
START
(to power on controller)
蓝灯⻓ 。
指⽰灯状态
红灯
绿灯
绿灯熄灭
蓝灯